[arm-allstar] UV-82 connecting

[Bill Burke]

You need to use the real time tools in Simpleusb. Run Simpleuse-tune from  
the Admin Menu(Item 12).
Then use Option V to look at the COS and PTT signals. If you make any  
changes remember to save them before you exit.

Good Luck, WA2NCH



On Tue, 11 Aug 2020 17:39:33 -0400, "David H. via ARM-allstar"  
<arm-allstar at hamvoip.org> wrote:

> I've had this happen. You need to invert the COS in the settings.
>
> On August 11, 2020 2:03:38 PM CDT, "Chris Viningre via ARM-allstar"  
> <arm-allstar at hamvoip.org> wrote:
>> I have had this happen before. I may be wrong but I believe I had to
>> change
>> the COS setting.
>>
>> On Sun, Aug 9, 2020, 7:28 PM "Douglas Goree via ARM-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>>> I have a Pofang uv82 and built a board to the schematic, connected to
>> ARA
>>> board from technoGoerge having trouble getting it to work. I've had
>> it to
>>> give callsign and IP address. When I *380 or *80 for time, I hear the
>> tone
>>> coming back when unkeyed. I have doubled and tripled checked the
>> board and
>>> sure it is right. In the usb tune I see cos keyed and ptt will key
>> for a
>>> second or two and go off while holding keyed. I need your help cause
>> I've
>>> done all I can figure out to do besides changing resistors. I'll be
>> very
>>> grateful for any help.
>>> _______________________________________________
>>>
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>


-- 
Using Opera's mail client: http://www.opera.com/mail/