[arm-allstar] Adding Second Node to Server

[David McGough]

When you save the simpleusb-tune-menu settings, each stanza (and FOB) get 
their own simpleusb_tune_*.conf file automatically generated, in the 
/etc/asterisk folder. These tune files have the parameters (devstr=) which 
associate that stanza with a given USB port ID.

73, David KB4FXC


On Mon, 20 Apr 2020, "Kevin Davis via ARM-allstar" wrote:

> I thought I had following the directions to a tea, but I'll give it another
> shot.
> 
> For my understanding, how does Asterisk know which physical USB port is
> associated with which simpleusb stanza?
> 
> On Mon, Apr 20, 2020 at 9:29 AM "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
> > Kevin,
> >
> >  You need to add the second FOB as per the instructions on pages 10-12 at
> > the end of the setup docs. There is a specific order. If it is not
> > associating make sure you have TWO active stanzas in simpleusb.conf
> > defined. Whatever they are called, lets say [USB1] and [USB2] or they could
> > be called the node numbers for distinction, you must also have a
> > corresponding rxchannel=SimpleUSB/usb1 in the first node stanza and
> > rxchannel=SimpleUSB/usb2  in the second node stanza in rpt.conf. The names
> > must match, so if you did use node numbers say [56001] in simpleusb then it
> > would be  rxchannel=SimpleUSB/56001  in rpt.conf.
> >
> > *73 Doug, WA3DSP*
> > *http://wa3dsp.org <http://wa3dsp.org>*
> >
> >
> > On Mon, Apr 20, 2020 at 11:10 AM "Kevin Davis via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Over the weekend, I tried to add a second node to my server and couldn't
> > > seem to get all my dots connected.
> > >
> > > The server currently has one radio-less node and I was attempting to add
> > an
> > > Alinco Dr-135 as my second node.
> > >
> > > I was going off pages 10-12 of this document.
> > > https://www.hamvoip.org/config-setup.pdf
> > >
> > > The document doesn't go into specifics re: the extensions.conf or
> > iax.conf
> > > changes, but I think I did those correctly.
> > >
> > > My problem seems to be that once I plug the new FOB in, it's not getting
> > > associated with the usb2 stanza in simpleusb correctly.  What is going on
> > > behinds the scenes when I restart Asterisk after plugging in the new FOB
> > > that ties it to the correct simpleusb stanza?
> > >
> > > Thanks for any pointers!
> > >
> > > -Kevin (KE7K)
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>