[arm-allstar] removing squelch crash with the SA818

[Doug Crompton]

OK understand.  Well this should be supplied by those manufacturers using
the SA818 since it is a hardware issue. I believe the clearnode and others
use that module. Those manufacturers should supply code for their product
and if they want to share it for distribution in our code we could do that.
The sa818 programming code at our site is old (probably 3-4 years).


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Thu, Apr 2, 2020 at 2:36 PM "Doug Langley via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I think we are talking about 2 different things. I'm refering to the
> local squelch on my radio after the  allstar node unkeys.  I thought the
> rxdelay was for the squelch
> burst that gets sent over the network when I unkey.
> am I miss understanding how things work?
>
> On 4/2/2020 8:12 AM, "Doug Crompton via ARM-allstar" wrote:
> > Yes dcs is preferred to pl filter. We just did not take the PL filter out
> > so you have the option. Doesn't the simpleusb-tune-menu  rxaudiodelay
> work
> > for you? Values of 5-7 are typical but you can go higher.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> > On Thu, Apr 2, 2020 at 11:07 AM "Doug Langley via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> I am trying to find a good way to remove the squelch crash when using
> >> SA818 based radios.
> >>   From the research I have done, it looks like the two best ways to do
> >> this are by using DCS instead of PL, or by using the
> >> Close Tail Tone Command
> >> in the SA818 radio.
> >> It doesn't appear as if the 818-prog script supports the
> >>
> >> AT+SETTAIL=0
> >> Would this be  something that would be easy to put in a future release,
> >> or, do you have any good suggestions of easy ways to send this command
> >> to the radio?
> >> I would rather stay with PL, to not reprogram a bunch of radios, but, if
> >> DCS is better for some reason,I can go that route
> >>
> >> Thanks as always for your help.
> >> Doug
> >>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org