[arm-allstar] removing squelch crash with the SA818

[Patrick Perdue]

I tried to add this to the existing 818-prog Python script. Maybe 
someone who is smarter than me can look at this and see what I did wrong.

Here is some output from the script. The commands it's supposedly 
sending look OK, but clearly there is something else going on.

Sending Freq Information...
     Error, invalid information (+DMOSETGROUP:1). Check input format..
  Command Sent:
         AT+DMOSETGROUP=1,439.050,439.050,0004,1,0004

[root at allstar02 ~]#


And here is a link to the actual script if anyone wants to look at it.

http://xlx.borris.me/818-prog-2.zip

I don't have one of these modules to test with, so I remoted into a 
friend's node.


On 4/2/2020 12:38 PM, "Doug Langley via ARM-allstar" wrote:

> I think we are talking about 2 different things. I'm refering to the 
> local squelch on my radio after the  allstar node unkeys.  I thought 
> the rxdelay was for the squelch
> burst that gets sent over the network when I unkey.
> am I miss understanding how things work?
>
> On 4/2/2020 8:12 AM, "Doug Crompton via ARM-allstar" wrote:
>> Yes dcs is preferred to pl filter. We just did not take the PL filter 
>> out
>> so you have the option. Doesn't the simpleusb-tune-menu rxaudiodelay 
>> work
>> for you? Values of 5-7 are typical but you can go higher.
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>> On Thu, Apr 2, 2020 at 11:07 AM "Doug Langley via ARM-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>>> I am trying to find a good way to remove the squelch crash when using
>>> SA818 based radios.
>>>   From the research I have done, it looks like the two best ways to do
>>> this are by using DCS instead of PL, or by using the
>>> Close Tail Tone Command
>>> in the SA818 radio.
>>> It doesn't appear as if the 818-prog script supports the
>>>
>>> AT+SETTAIL=0
>>> Would this be  something that would be easy to put in a future release,
>>> or, do you have any good suggestions of easy ways to send this command
>>> to the radio?
>>> I would rather stay with PL, to not reprogram a bunch of radios, 
>>> but, if
>>> DCS is better for some reason,I can go that route
>>>
>>> Thanks as always for your help.
>>> Doug
>>>
>>> _______________________________________________
>>>
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org