[arm-allstar] removing squelch crash with the SA818

[Doug Langley]

I think we are talking about 2 different things. I'm refering to the 
local squelch on my radio after the  allstar node unkeys.  I thought the 
rxdelay was for the squelch
burst that gets sent over the network when I unkey.
am I miss understanding how things work?

On 4/2/2020 8:12 AM, "Doug Crompton via ARM-allstar" wrote:
> Yes dcs is preferred to pl filter. We just did not take the PL filter out
> so you have the option. Doesn't the simpleusb-tune-menu  rxaudiodelay work
> for you? Values of 5-7 are typical but you can go higher.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Thu, Apr 2, 2020 at 11:07 AM "Doug Langley via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> I am trying to find a good way to remove the squelch crash when using
>> SA818 based radios.
>>   From the research I have done, it looks like the two best ways to do
>> this are by using DCS instead of PL, or by using the
>> Close Tail Tone Command
>> in the SA818 radio.
>> It doesn't appear as if the 818-prog script supports the
>>
>> AT+SETTAIL=0
>> Would this be  something that would be easy to put in a future release,
>> or, do you have any good suggestions of easy ways to send this command
>> to the radio?
>> I would rather stay with PL, to not reprogram a bunch of radios, but, if
>> DCS is better for some reason,I can go that route
>>
>> Thanks as always for your help.
>> Doug
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org