[arm-allstar] File Not Playing Globally

[David McGough]

Kyle,

Sounds good.  Another simple work-around would be to run the playback from 
node 40105. Then, node 1085 could remain duplex=0.

73, David KB4FXC


On Sun, 29 Sep 2019, Kyle Krieg wrote:

> Got it.
> 
> Node 1085 is set to duplex = 0
> 
> Node 40105 is set to duplex = 1
> 
> The reason why we set node 1085 to duplex = 0 is because it's connected to
> a CAT800 on port 2, as it was suggested in the rpt.conf file to set it to
> duplex=0.
> 
> Anyway we can set node 1085 to duplex=1 but have it connected full time to
> a CAT800 repeater controller.  If not, we have a work around, which isn't
> that big deal.  Just was making sure I wasn't doing something wrong.
> 
> Kyle
> 
> 
> 
> 
> 
> On Fri, Sep 27, 2019 at 5:13 AM David McGough <kb4fxc at inttek.net> wrote:
> 
> >
> > Kyle,
> >
> > What are the rpt.conf duplex settings on these nodes?? I'm guessing
> > node 1085 and/or 40105 are set duplex=0.
> >
> > To propagate a playback message, the originating and all relaying nodes
> > must not be set duplex=0.  The final endpoints can be duplex=0.
> >
> > So, for example, doing a playback from node 1085:
> >
> > 1085  (not duplex=0)
> >  |
> >  |
> >  V
> > 40105 (not duplex=0)
> >  |
> >  |
> >  V
> > 48370 (duplex=0 okay)
> >
> >
> > 73, David KB4FXC
> >
> >
> > On Thu, 26 Sep 2019, "Kyle Krieg via ARM-allstar" wrote:
> >
> > > I have this line in a script I call via DTMF.
> > >
> > > /usr/bin/asterisk -rx "rpt playback 1085 /tmp/newsline/newsline"
> > >
> > > When executing this script from node 1085, the newsline file plays
> > locally
> > > on 1085, but does not play on any other nodes connected.  I was under the
> > > assumption "playback" was for global playback and localplay was for only
> > > playing locally?  Is there an attribute I'm missing?
> > >
> > > There are two other nodes connected, three nodes total.  All are
> > connected
> > > via transceive.
> > >
> > > Here is the bubble chart of who's all connected.
> > >
> > > http://stats.allstarlink.org/getstatus.cgi?48370
> > >
> > > Thanks
> > > Kyle
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> >
> >
>