[arm-allstar] File Not Playing Globally

[Kyle Krieg]

Got it.

Node 1085 is set to duplex = 0

Node 40105 is set to duplex = 1

The reason why we set node 1085 to duplex = 0 is because it's connected to
a CAT800 on port 2, as it was suggested in the rpt.conf file to set it to
duplex=0.

Anyway we can set node 1085 to duplex=1 but have it connected full time to
a CAT800 repeater controller.  If not, we have a work around, which isn't
that big deal.  Just was making sure I wasn't doing something wrong.

Kyle





On Fri, Sep 27, 2019 at 5:13 AM David McGough <kb4fxc at inttek.net> wrote:

>
> Kyle,
>
> What are the rpt.conf duplex settings on these nodes?? I'm guessing
> node 1085 and/or 40105 are set duplex=0.
>
> To propagate a playback message, the originating and all relaying nodes
> must not be set duplex=0.  The final endpoints can be duplex=0.
>
> So, for example, doing a playback from node 1085:
>
> 1085  (not duplex=0)
>  |
>  |
>  V
> 40105 (not duplex=0)
>  |
>  |
>  V
> 48370 (duplex=0 okay)
>
>
> 73, David KB4FXC
>
>
> On Thu, 26 Sep 2019, "Kyle Krieg via ARM-allstar" wrote:
>
> > I have this line in a script I call via DTMF.
> >
> > /usr/bin/asterisk -rx "rpt playback 1085 /tmp/newsline/newsline"
> >
> > When executing this script from node 1085, the newsline file plays
> locally
> > on 1085, but does not play on any other nodes connected.  I was under the
> > assumption "playback" was for global playback and localplay was for only
> > playing locally?  Is there an attribute I'm missing?
> >
> > There are two other nodes connected, three nodes total.  All are
> connected
> > via transceive.
> >
> > Here is the bubble chart of who's all connected.
> >
> > http://stats.allstarlink.org/getstatus.cgi?48370
> >
> > Thanks
> > Kyle
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>