[arm-allstar] Cop,48

[Jay Urish]

Hey Larry,

You know what works better than that?

Get a serial to USB adapter and cable the pi to the 210.

You can get the pi to send whatever you want down to the 210 serial port...


On 9/19/19 2:19 PM, "larry via ARM-allstar" wrote:
> Helping a friend with a new node. After installing the latest Hamvoip 
> software on a Pi3+ I find it no longer transmits the digits following 
> the cop 48 command.
> These are used to send commands to his Arcom RC-210.
> Using the CLI It appears to act on the command --> rpt fun (node) 
> *983  but no tone is transmitted via the radio.
>
> The 983 cop 48 command has been configured and allstar restarted but 
> it still doesn't transmit.
> Same command works on his older hamvoip version on a BeagleBone but 
> not this newer version of the Pi.
>
> Has there been some change that I missed that no longer allows sending 
> DTMF tones via cop,48 ?
>
> Larry - N7FM
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org