[arm-allstar] Cop,48

[David McGough]

Hi Larry,

I just tried all my standard test sequences here and they all work 
perfectly:

rpt cmd 1998 cop 48 !0/500,!1100+1700/100,!700+900/60,!700+1100/60,!700+900/60,!1500+1700/60

rpt cmd 1998 cop 48 !0/500,!399.8/1000,!339.6/2000

rpt cmd 1998 cop 48 !0/500,!697+1209/200,!0/200,!697+1336/200,!0/200,!697+1477/200,!0/200,!770+1209/200,!0/200

rpt cmd 1998 cop 48 !0/500,1,2,3,A,4,5,6,B,7,8,9,C,*,0,#,D

rpt cmd 1998 cop 48 !0/500,!1068+1068.35/1400


....Replace the 1998 with your node number.

73, David KB4FXC


On Thu, 19 Sep 2019, "larry via ARM-allstar" wrote:

> Helping a friend with a new node. After installing the latest Hamvoip 
software on a Pi3+ I find it no longer transmits the digits following 
the cop 48 command.
These are used to send commands to his Arcom RC-210.
Using the CLI It appears to act on the command --> rpt fun (node) *983Â  
but no tone is transmitted via the radio.

The 983 cop 48 command has been configured and allstar restarted but it 
still doesn't transmit.
Same command works on his older hamvoip version on a BeagleBone but not 
this newer version of the Pi.

Has there been some change that I missed that no longer allows sending 
DTMF tones via cop,48 ?

Larry - N7FM
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org