[arm-allstar] Pi 4 Will not complete first boot.

[David McGough]

Hi Mark,

That software image definitely boots and runs on RPi4B boards. I would 
recommend trying another power supply. The power requirements for the RPi4 
can be considerably higher than the RPi3 series.


73, David KB4FXC


On Sun, 20 Oct 2019, "Mark Johnston via ARM-allstar" wrote:

> Hello everyone,
> 
> Having trouble with booting the image on a Pi 4, bought the 4GB model, and
> wanted to test Pi4's performance.
> 
> https://www2.hamvoip.org/RPi2/RPi2-3-4_V1.6-01_Allstar.img.xz
> 
> Thats the link I used, SHA1 Checksum checked out after decompressing
> Brand new 32GB SD card, rewrote image 2x no change stuck on the colorful
> boot screen. What normally displays and disappears in a second or so...
> 
> Wrote Raspbian image, works fine same SD card... boots to desktop without
> issues.
> 
> What I was hoping to get was better TTS performance... any ideas what might
> be wrong?
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>