[arm-allstar] Hamvoip Distribution Update 1.6-05

[David McGough]

Jeffrey,

The reason those parameters aren't listed is that the txmixa, txmixb and
txboost aren't used by the simpleusb driver at all (and you can remove
them from the file if you've added them). Only rxboost=[0|1] is used and 
read from the simpleusb.conf file.

The audio levels for simpleusb are set in the individual simpleusb_tune 
files--one file for each adapter device defined in simpleusb.conf.

I recommend using the simpleusb-tune-menu program to setup and save these 
files. That setup program makes configuration much simpler.


73, David KB4FXC



On Wed, 6 Nov 2019, "Jeffrey Reid via ARM-allstar" wrote:

> Hello David,

I think I may have found a potential issue in nano 
/etc/asterisk/simpleusb.conf as it relates to using a Rim-Lite Alinco 
with the node.  In the schematics, these values are listed:

txmixa=voice
txmixb=no
rxboost=0
txboost=0

Except for the rxboost, these values were not listed in the hamvoip 
software.  Without listing them there is nothing but audio hash.  Once 
listed the audio “magically” appears. 

I spent an evening trying to figure out why I had nothing but hash for 
audio.  Noticing that the above values were not listed, I added them just 
underneath the invertptt line/s and all was well.

73
Jeffrey Reid N6TDG
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org