[arm-allstar] USBRadio - Save Settings

[Brad Trogdon]

Have two questions but main one is around USBRadio Tune Menu.  When
selecting 2) Auto-Detect Rx Noise Level Value (with no carrier) the option
works and sets the correct value until another menu selection is made or
until AllStar restarts.

Here is the returning message that says ERROR: RX INPUT ADJUST FAILED.
<Full Snip-It below>

I am using the latest version of HamVoIp.

A. Where should the settings be saved? or where can I find the setting that
is temporarily applied?
B. Should their be an entry in /etc/asterisk/usbradio_tune_usb23702 for
sqnoise or something similar to set and maintain the value?
C.Last question is I updated via the Admin Menu List by selecting 1 Perform
a system UPDATE.  Through the process I observed errors but they scrolled
by so fast could not comprehend them.  Where can I find a log or view the
errors that presented during the update?

<Snip-It>
Please enter your selection now: 2
tune rxnoise maxtries=12, target=27000, tolerance=2750
tries=0, setting=2, meas=65
tries=1, setting=16, meas=786
tries=2, setting=16, meas=734
tries=3, setting=16, meas=9349
tries=4, setting=16, meas=5417
tries=5, setting=16, meas=25529
tries=6, setting=16, meas=710
tries=7, setting=16, meas=667
tries=8, setting=16, meas=672
tries=9, setting=16, meas=674
tries=10, setting=16, meas=780
tries=11, setting=16, meas=687
DONE tries=12, setting=1000, meas=687, sqnoise=114
ERROR: RX INPUT ADJUST FAILED.

I have searched the archives with negative results.  As always thank you to
the HamVoIp community for your assistance.