[arm-allstar] Hamvoip Update V1.5.3-56

[Doug Crompton]

James,

 Yes, that is correct. We have a supermon simpleusb settings option in beta
now. I suspect it could be released in a week or so. BTW it will be in the
edit menu so like the configuration editor you can have two levels of login
so only some users can have access to those options.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Jul 13, 2019 at 9:15 PM "James Hause via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi Doug,
> I did do an update, and see that the simpleusb tune control now shows up
> when I click on the configuration editor.
> I assume to make use of this, I still need to wait for the supermon script
> to be completed before it will work ?
>
>
> On Tue, Jul 9, 2019 at 12:07 AM "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > The update that went out last night used a variable for the TX DSP level
> > that had previously been released in a prior update set to a test level
> of
> > 500. This interfered with last nights update. This has been re-released
> > tonight with a new variable name - txdsplvl  vs. the original txdsplevel
> > which is no longer used. When you install this update the TX DSP Level
> will
> > be set to 999 or maximum level to start in simpleusb-tune-menu. This will
> > NOT effect any of your current settings. I am repeating last nights
> message
> > below for reference. The TX DSP level setting is only intended to lower
> the
> > level (values of 999 or less) after coarse setting the mixer level. In
> most
> > cases unless you need a fine setting the DSP level can be left at 999 and
> > as always use the TX mixer level to set the TX level. More info in the
> > message below.
> >
> > -----------------------------------------------------------
> > From last night.....
> >
> > There is an update out tonight which updates the simpleusb-tune-menu
> > script, the chan_simpleusb.so channel driver and corrects some minor
> mostly
> > display issues in supermon, lsnodes, and IRLP. Users should update using
> > the ADMIN menu item 1.  IRLP users should update to improve file loading
> > reliability at boot.
> >
> > A new parameter has been added to the simpleusb-tune-menu script called
> > Transmit DSP Level. this level allows fine adjustment of the TX levels of
> > your FOB if necessary. Most users will not need to use it or set it. By
> > default it is set to 999 and finely adjusts the TX level DOWN. So if you
> do
> > use it you would set the actual mixer level to a level a few steps higher
> > than required and then fine adjust by reducing the DSP level down from
> 999.
> > While it can be set lower the DSP level should be kept in the 800 to 999
> > range. Users of the CM119B chip could find the DSP setting more useful as
> > the mixer range of the B chip is much coarser than prior chips. This
> would
> > mostly be confined to repeaters where you are using a service monitor to
> > make more accurate adjustments. Always set the mixer level first and use
> > the DSP level to lower the gain.If not using the DSP level leave it set
> to
> > 999. Note that the DSP level changes BOTH TXA and TXB channels equally.
> >
> > Note that a few lines in simpleusb-tune-menu have been integrated into
> one
> > line to reduce the number of total lines to not exceed displayable lines
> on
> > certain displays.
> >
> > In addition the chan_simpleusb.so module has been enhanced to provide for
> > the setting and reading using json of all configuration values. This will
> > be used in a supermon script allowing you to configure simpleusb
> > graphically. The updated supermon code to do this is currently in beta
> and
> > will be released soon.
> >
> > Files updated include:
> >
> > Supermon web files updated:
> >
> > ast_reload.php
> > astlookup.php
> > fastrestart.php
> > header.inc
> > index.php
> > link.php
> > nodeinfo.inc
> > reboot.php
> > server.php
> > stats.php
> > configeditor.php
> >
> > IRLP files updated (if IRLP installed) :
> >
> > custom.crons
> > loadcalls
> > rc.irlp
> > call
> > statupdate
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>