[arm-allstar] Lock Up on USB power reset

[Doug Crompton]

Bryan,

   I confirmed this behavior here. Something has changed. I would recommend
NOT using the USB reset option until we get it resolved.  Resetting or
rebooting would be preferred.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Fri, Jan 4, 2019 at 10:52 PM "Bryan St Clair via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have a node that when you do a USB power reset on the admin menu, the
> node locks up on SSH and a blue background displayed, then no response
> until a cold boot.
>
> I only came across this when the sound stopped after a courtesy tone change
> in rpt.conf . After a asterisk restart, I had no RX or TX from the node
> radio seen by the Pi.  I did a usb power recycle and everything was fine
> until it locked again.  On the 2nd attempt to reset the USB power, it
> locks.
>
> Any ideas?
>
> --
> Bryan
> K6CBR
> bryan at k6cbr.us
> Allstar Base: 43918, 43991
> Allstar Hubs: 43919, 47036, 47061(Testing)
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>