[arm-allstar] Lock Up on USB power reset

[Bryan St Clair]

Understood.  Thank you.

On Fri, Jan 4, 2019 at 8:34 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Bryan,
>
>    I confirmed this behavior here. Something has changed. I would recommend
> NOT using the USB reset option until we get it resolved.  Resetting or
> rebooting would be preferred.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Fri, Jan 4, 2019 at 10:52 PM "Bryan St Clair via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I have a node that when you do a USB power reset on the admin menu, the
> > node locks up on SSH and a blue background displayed, then no response
> > until a cold boot.
> >
> > I only came across this when the sound stopped after a courtesy tone
> change
> > in rpt.conf . After a asterisk restart, I had no RX or TX from the node
> > radio seen by the Pi.  I did a usb power recycle and everything was fine
> > until it locked again.  On the 2nd attempt to reset the USB power, it
> > locks.
> >
> > Any ideas?
> >
> > --
> > Bryan
> > K6CBR
> > bryan at k6cbr.us
> > Allstar Base: 43918, 43991
> > Allstar Hubs: 43919, 47036, 47061(Testing)
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>


-- 
Bryan
K6CBR
bryan at k6cbr.us
Allstar Base: 43918, 43991
Allstar Hubs: 43919, 47036, 47061(Testing)