[arm-allstar] Using Allstar as a digital voter system

[Sean McCarthy]

This is interesting. We have invested in several RTCM units for our local
RACES repeater and were under the assumption we had to run ASL...

Doesn't the image have to run on the RTCM? Can Hamvoip be installed on the
RTCM's?

Or am I way off base on this...

Thanks as always,
Sean

On Fri, Aug 2, 2019 at 1:55 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Voting has been part of Allstar for years and is included in the hamvoip
> release. You need hardware to do it - typically an RTCM and GPS.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Fri, Aug 2, 2019 at 1:53 PM "Mike Sullivan via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I'm curious, has anyone ever thought of, or attempted a voter type system
> > using Allstar? I.E. using Allstar as local nodes to several receivers,
> > digitally analyzing signal strength, and Allstar picking the strongest
> > signal to pass on to the repeater? Would be an interesting and
> inexpensive
> > concept, I would think.
> >
> > Or, am I an idiot and just missed the Howto on that?
> >
> > Mike
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>