[arm-allstar] RIM-Lite no longer keying RC-210 controller

[David McGough]

Mike,

Does the PTT LED come on properly on the RIM-Lite?

73, David KB4FXC


On Sun, 21 Apr 2019, "Mike Sullivan via ARM-allstar" wrote:

> All, after working fine (even as late as this morning) all of a sudden our
> node is no longer transmitting correctly. (Using a RIM-Lite on an RC210).
> The controller is seeing COS, but is not activating PTT. When talking on
> the repeater, the interface is receiving the transmission just fine.. but
> no matter what, the interface is no longer transmitting to the repeater.
> Port linking is enabled (Port 1 (repeater) to Port 3 (RIM)), Port 3 Rx and
> Tx both on, Port 3 set for COS only for transmit, no CTCSS.. literally
> nothing has changed, and no amount of rebooting the node will fix the
> problem.
> 
> When I do reboot, the PTT light will come on for a couple seconds, go off,
> then the CTCSS light comes on for a couple settings, then go back off, and
> it will sit off until traffic is received. When I connect to a node via
> Supermon or when that node is talking, the COS light is activating, but not
> PTT. I've tried switching to Port 2 with the same settings, and the same
> thing happens.
> 
> I feel like the fault is in the controller, although literally NOTHING has
> changed and it has been working fine for the past couple of weeks. Any idea
> what the problem could be?
> 
> Mike
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>