[arm-allstar] speaktext.sh

[Doug Crompton]

Steve,

 There are only two ways to say audio, Local (playlocal) and global
(playback)  Local is just to local RF and IAX, Global is to both local RF
and all connected nodes. So the answer is no you can't send telemetry out
to connected nodes without sending it locally also.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Tue, Apr 9, 2019 at 4:26 PM "Steve Mobley - WB4BXO via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have a private node that is attached to an IC-7000 that I have made
> “phone patch” scripts for to change channels on the radio. I want to be
> able to speak the frequency back up the connections to be able to hear and
> verify the frequency before using it. I’m using speaktext.sh to do it now
> with
> speaktext.sh “ ${FREQ}” ${NODE} where FREQ is read from the radio with
> rigctl.
> Using this the frequency is spoken out the radio (not wanted) and spoken
> to iaxrpt if connected (wanted) but does not speak it back up to another
> connected node like my portable node or 220 node on the same network
> (wanted - I use remote-command.sh and/or *4 to get to the private node for
> control).
> Is there a way to have it speak text back up the connected nodes and not
> out the radio?
>
> Steve Mobley - WB4BXO
> --- hello, I am an iApp-oholic...
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org