[arm-allstar] In/Out connection problem w/BetaDNS

[Doug Crompton]

Jud,

 A server must be registered in order to connect in the public Allstar
system. If you run check_reg.sh and it does not show registered then it is
not going to work. If this is the case and turning your node off for 15
minutes then back on and it still does not register get back to me
privately with your node number and IAX port for that node and we can issue
you a hamvoip registration line.

/if you are trying to connect between nodes on different servers on the
same LAN and it is not working you probably need to put routing information
in the rpt.conf files of both nodes with the local IP address and IAX port
of the other server.  See the howto for multiple servers on one LAN at the
hamvoip.org website for more information.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Fri, Sep 28, 2018 at 8:31 PM "mrnet via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I am setting up a second server and checked the settings against the first
> working server. Both are running the BetaDNS. The second appears to be
> registered as I can see all of the usual WebPages. I can not connect out or
> connect in. In the CLI when I run the rpt lookup I get a not found on the
> registered node 48637 and a get a good return on the 1999 node. The
> node_lookup_method=dns is in both places and spelled correctly.
>
> the Supermon is working too I have reviewed the BetaDNS docs and I didn't
> miss anything in the modification. Any ideas?
>
>
>
> Thanks
>
> Jud
>
> N6GYF
>
>
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>