[arm-allstar] Pi Terminal Sleep

[Charles Powell]

You can check console blanking with the command 'cat /sys/module/kernel/parameters/consoleblank’  to tell you whether blanking is on or off. It will return ‘0’ if off.  To enable in /boot/cmdline, the command is ‘consoleblank=xxx’ where xxx is the number of seconds delay before the screen goes off.   This is a kernel parameter.  /boot/cmdline must remain a single line.

73,

Charles - NK8O


> On May 25, 2018, at 6:15 AM, James Hause via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Thanks for the quick reply.  I did the change, but monitor still does not
> blank.
> Here is what the config.txt has after I updated.
> 
> # See /boot/overlays/README for all available options
> 
> gpu_mem=64
> initramfs initramfs-linux.img followkernel
> hdmi_blanking=1
> 
> 
> On Fri, May 25, 2018 at 1:06 AM, "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Jim,
>> 
>> Now sure why anything would have changed.
>> 
>> Try adding -
>> 
>> hdmi_blanking=1
>> 
>> to /boot/config.txt should fix the issue. Don't change anything else in
>> that file.
>> 
>> Let us know if that works.
>> 
>> 
>> *73 Doug*
>> 
>> *WA3DSP*
>> 
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>> 
>> 
>> 
>> 
>> 
>> On Thu, May 24, 2018 at 6:30 PM, "James Hause via arm-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>> 
>>> Not that this is a big deal, but I have noticed one thing since I did the
>>> last update today.
>>> On my hardware configuration, I have a 19 inch monitor attached to the
>> Pi.
>>> When I boot up my node, I would login, and get to the Admin screen.
>> After
>>> a few minutes of inactivity, the screen would go blank, and I would just
>>> press a key, and the screen would come back.
>>> After I did the update today, and I login in,  I get the admin screen,
>> and
>>> all is good, except now the screen does not go blank after minutes of
>>> inactivity.  Not that this is a big deal, but don't want to burn an image
>>> on my display, so my question is do I need to change a setting somewhere
>>> now ?
>>> _______________________________________________
>>> 
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>> 
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org