[arm-allstar] Pi Terminal Sleep

[James Hause]

Thanks for the quick reply.  I did the change, but monitor still does not
blank.
Here is what the config.txt has after I updated.

# See /boot/overlays/README for all available options

gpu_mem=64
initramfs initramfs-linux.img followkernel
hdmi_blanking=1


On Fri, May 25, 2018 at 1:06 AM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Jim,
>
> Now sure why anything would have changed.
>
>  Try adding -
>
> hdmi_blanking=1
>
> to /boot/config.txt should fix the issue. Don't change anything else in
> that file.
>
> Let us know if that works.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
>
>
> On Thu, May 24, 2018 at 6:30 PM, "James Hause via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Not that this is a big deal, but I have noticed one thing since I did the
> > last update today.
> > On my hardware configuration, I have a 19 inch monitor attached to the
> Pi.
> > When I boot up my node, I would login, and get to the Admin screen.
> After
> > a few minutes of inactivity, the screen would go blank, and I would just
> > press a key, and the screen would come back.
> > After I did the update today, and I login in,  I get the admin screen,
> and
> > all is good, except now the screen does not go blank after minutes of
> > inactivity.  Not that this is a big deal, but don't want to burn an image
> > on my display, so my question is do I need to change a setting somewhere
> > now ?
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>