[arm-allstar] Pi Terminal Sleep

[Doug Crompton]

Jim,

Now sure why anything would have changed.

 Try adding -

hdmi_blanking=1

to /boot/config.txt should fix the issue. Don't change anything else in
that file.

Let us know if that works.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*





On Thu, May 24, 2018 at 6:30 PM, "James Hause via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Not that this is a big deal, but I have noticed one thing since I did the
> last update today.
> On my hardware configuration, I have a 19 inch monitor attached to the Pi.
> When I boot up my node, I would login, and get to the Admin screen.  After
> a few minutes of inactivity, the screen would go blank, and I would just
> press a key, and the screen would come back.
> After I did the update today, and I login in,  I get the admin screen, and
> all is good, except now the screen does not go blank after minutes of
> inactivity.  Not that this is a big deal, but don't want to burn an image
> on my display, so my question is do I need to change a setting somewhere
> now ?
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>