[arm-allstar] Pi Issue

[Jeffrey Lehman, KC8QCH]

Doug,

    Does the image support the file creation trick in the boot folder 
like other distros?

     Where you create a wpa_supplicant.conf and ssh file in the boot 
folder on another computer and then pull the card, stick it in the pi 
and wait? My Pi3 is hardwired so I have not had to do that trick to it, 
but I was curious.

     Jeff


On 5/9/2018 14:34, "Doug Crompton via arm-allstar" wrote:
> Dsnny,
>
>   Wireless setup is easy. If you can connect it wired or connect a keyboard
> and HDMI monitor the setup is in the main menu. Follow the prompts and
> select the access point you want to connect to from the list and then the
> pass phrase to that access point. At the end reboot and disconnect the
> wired connection. Do not have both wired and wireless connected at the same
> time. Wired and wireless have different mac addresses and would receive
> different IP addresses which confuses the SW.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Wed, May 9, 2018 at 9:24 AM, "Jim Darrough via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Hello Danny.
>>
>>      When I wrote a new image and set it up, things worked fine. Doesn't
>> look like an edit was necessary. Maybe the menu that allows one to set the
>> ssh port does that for you?
>>
>>      Anyway, all I need to do now is get the wireless laptop in my house to
>> connect. I can connect in the HamShack from any of my wired computers. I
>> have a wireless router in my shack that is set up in bridge mode, so I
>> don't think that's the issue (no double NAT going on).
>>
>> 73 JimKI7AY
>>
>>
>> On 05/08/2018 04:11 PM, "Danny K5CG via arm-allstar" wrote:
>>
>>> If you are trying to ssh as root, don't forget to edit
>>> /etc/ssh/sshd_config and set Permitrootlogin to yes, and then restart the
>>> ssh service.
>>> If you are not trying as root then this doesn't solve the problem.
>>>
>>> Danny
>>> K5CG
>>>
>>> ----- Original Message -----
>>> From: "ARM Allstar" <arm-allstar at hamvoip.org>
>>> To: "ARM Allstar" <arm-allstar at hamvoip.org>
>>> Cc: "Jim Darrough" <jim at ki7ay.com>
>>> Sent: Tuesday, May 8, 2018 3:51:00 PM
>>> Subject: [arm-allstar] Pi Issue
>>>
>>> Doug, I seem to have misconfigured my pi such that I cannot ssh into it.
>>> I set the ssh port, and I can ping the box, but no matter what I try, it
>>> always gives me "connection refused" when I try SSH (both Linux and
>>> Windows) or Winscp.
>>>
>>> Where can I look to see what I did?
>>>
>>> 73 Jim KI7AY
>>> _______________________________________________
>>>
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>> _______________________________________________
>>>
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>
>>>
>> --
>> 73 Jim
>> La ciruela de Panamá
>>
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org