[arm-allstar] Pi Issue

Doug Crompton wa3dsp at gmail.com
Wed May 9 13:34:22 EST 2018


Dsnny,

 Wireless setup is easy. If you can connect it wired or connect a keyboard
and HDMI monitor the setup is in the main menu. Follow the prompts and
select the access point you want to connect to from the list and then the
pass phrase to that access point. At the end reboot and disconnect the
wired connection. Do not have both wired and wireless connected at the same
time. Wired and wireless have different mac addresses and would receive
different IP addresses which confuses the SW.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Wed, May 9, 2018 at 9:24 AM, "Jim Darrough via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello Danny.
>
>     When I wrote a new image and set it up, things worked fine. Doesn't
> look like an edit was necessary. Maybe the menu that allows one to set the
> ssh port does that for you?
>
>     Anyway, all I need to do now is get the wireless laptop in my house to
> connect. I can connect in the HamShack from any of my wired computers. I
> have a wireless router in my shack that is set up in bridge mode, so I
> don't think that's the issue (no double NAT going on).
>
> 73 JimKI7AY
>
>
> On 05/08/2018 04:11 PM, "Danny K5CG via arm-allstar" wrote:
>
>> If you are trying to ssh as root, don't forget to edit
>> /etc/ssh/sshd_config and set Permitrootlogin to yes, and then restart the
>> ssh service.
>> If you are not trying as root then this doesn't solve the problem.
>>
>> Danny
>> K5CG
>>
>> ----- Original Message -----
>> From: "ARM Allstar" <arm-allstar at hamvoip.org>
>> To: "ARM Allstar" <arm-allstar at hamvoip.org>
>> Cc: "Jim Darrough" <jim at ki7ay.com>
>> Sent: Tuesday, May 8, 2018 3:51:00 PM
>> Subject: [arm-allstar] Pi Issue
>>
>> Doug, I seem to have misconfigured my pi such that I cannot ssh into it.
>> I set the ssh port, and I can ping the box, but no matter what I try, it
>> always gives me "connection refused" when I try SSH (both Linux and
>> Windows) or Winscp.
>>
>> Where can I look to see what I did?
>>
>> 73 Jim KI7AY
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>>
> --
> 73 Jim
> La ciruela de Panamá
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org


More information about the arm-allstar mailing list