[arm-allstar] Sending a DTMF "A" with cop,48

[Stephen - K1LNX]

Thanks David, yep that seems to be the issue. I added the delay per your
example and it send it out.

73
Stephen
K1LNX

On Wed, Mar 28, 2018 at 4:50 PM, David McGough <kb4fxc at inttek.net> wrote:

>
> Stephen,
>
> I just tested these sequences, and it worked fine for me:
>
> rpt cmd 1798 cop 48 A,B,C,D
> rpt cmd 1798 cop 48 1,2,3,A,4,5,6,B,7,8,9,C,*,0,#,D
>
> I wonder if the "A" is getting generated too quickly (before the radio is
> transmitting?)?  If so, you could add a delay to the beginning of the
> sequence, like:
>
> rpt cmd 1798 cop 48 !0/100,A,B,C,D
>
>
> ...Which adds a 100ms delay before starting the "A" tones.
>
> 73, David KB4FXC
>
>
> On Wed, 28 Mar 2018, "Stephen - K1LNX via arm-allstar" wrote:
>
> > Have there been any changes to the way DTMF tones are being produced with
> > cop,48?
> >
> > I was playing around lastnight in prep for another potential project I
> have
> > in the works, and what I discovered was that DTMF "A" characters were not
> > being re-generated, but B, C, and D were just fine. This is what I was
> > using to test:
> >
> > 931=cop,48,A,B,C,D
> >
> > When I fired off this function, I only heard three tones (B, C, and D). I
> > tried "A" by itself with this statement and did not hear any tone. This
> > could be specific to my setup, but before I dig deeper I was curious if
> > this was already a known issue or not.
> >
> > 73
> > Stephen
> > K1LNX
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>