[arm-allstar] URIx Power Down

[Doug Crompton]

Chris,

 This is on the node in your car or the node back at home? Are you using an
external antenna? Not a rubber duck on the node? Have you observed at
exactly what point it goes out?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, Mar 10, 2018 at 6:33 PM, "Chris Viningre via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Yes the LEDs go completely out. Yes I use item 15 - power cycle usb to
> restart it. When I'm traveling across country and going in and out it works
> fine. Only seems to happen during long internet lost. I've changed
> everything but the URIx. I'll try one of my converted FOBs to see what
> happens, but I can't see why that would be it.
>
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510
> chrisviningre at gmail.com
>
>
> On Sat, Mar 10, 2018 at 4:08 PM, "Doug Crompton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Chris,
> >
> >    When you say "losing power"  what do you mean? No LED's lit on URI?
> > Solid green?  The green should be flashing. I am not sure loss of
> internet
> > would have to do with the USB and power to the URI.  You are using item
> 15
> > - power cycle usb to restart it?
> >
> > Long ago we use to have issues with the USB not resetting but that was
> > corrected. Power glitches or RF caused it to go dead. I have not seen or
> > heard of that issue since the SW fix several years ago.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> >
> > On Sat, Mar 10, 2018 at 5:37 PM, "Tom Whiteside via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > I had same thing here on our backup node that went into a leaky dummy
> > load.
> > > Switched to decent double shielded cable like I would do at a repeater
> > site
> > > and a good dummy load and has not reoccurred...   Pretty sure my issue
> > was
> > > RF getting into it but have not run it long enough this way to be
> totally
> > > confident this was my problem.   Zero issues with this at our repeater
> > > sites.
> > >
> > > Tom N5TW
> > >
> > > -----Original Message-----
> > > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf
> Of
> > > "Chris Viningre via arm-allstar"
> > >
> > > I have been chasing a problem on my portable node loosing power to the
> > > URIx.
> > > At first I though it was the USB cable going to the URIx so I replaced
> > it.
> > > I
> > > found it to happen more when I have a lost of data service.
> > > I go through many miles of area that have no cell service. I haven't
> > > determine how long it takes but for about 40 of my 60 miles commute to
> > work
> > > I don't have any cell service. Once I get into the city I can SSH
> through
> > > my
> > > phone and recycle the power to the USB and it works again. Do you know
> if
> > > there something in the software or URIx that shutdown during long times
> > > without internet? Is there some way I can keep it on so it will
> reconnect
> > > when I get service?
> > >
> > > Chris Viningre
> > > 70 W. Roadrunner
> > > Salt Flat, Texas 79847
> > > C:(915) 504-1510
> > > chrisviningre at gmail.com
> > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>