[arm-allstar] URIx Power Down

Chris Viningre chrisviningre at gmail.com
Sat Mar 10 19:16:07 EST 2018


It's my mobile node in my pickup. Most of the time I use a dummy load. I
started with one of the small mag-mount antennas and it did the same thing.
I don't use rubber ducks. I have experience the RF issue when I first
started. I added a counterpoise wire and that seem to help with any RF when
I did have a rubber duck antenna. I've now removed both.The only time I'm
transmitting from any radio is when I key up my mobile radio and don't get
a beep from the node. Next week I will put the node where I can see it and
see when it happens.

Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
chrisviningre at gmail.com


On Sat, Mar 10, 2018 at 4:58 PM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Chris,
>
>  This is on the node in your car or the node back at home? Are you using an
> external antenna? Not a rubber duck on the node? Have you observed at
> exactly what point it goes out?
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Mar 10, 2018 at 6:33 PM, "Chris Viningre via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Yes the LEDs go completely out. Yes I use item 15 - power cycle usb to
> > restart it. When I'm traveling across country and going in and out it
> works
> > fine. Only seems to happen during long internet lost. I've changed
> > everything but the URIx. I'll try one of my converted FOBs to see what
> > happens, but I can't see why that would be it.
> >
> > Chris Viningre
> > 70 W. Roadrunner
> > Salt Flat, Texas 79847
> > C:(915) 504-1510
> > chrisviningre at gmail.com
> >
> >
> > On Sat, Mar 10, 2018 at 4:08 PM, "Doug Crompton via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Chris,
> > >
> > >    When you say "losing power"  what do you mean? No LED's lit on URI?
> > > Solid green?  The green should be flashing. I am not sure loss of
> > internet
> > > would have to do with the USB and power to the URI.  You are using item
> > 15
> > > - power cycle usb to restart it?
> > >
> > > Long ago we use to have issues with the USB not resetting but that was
> > > corrected. Power glitches or RF caused it to go dead. I have not seen
> or
> > > heard of that issue since the SW fix several years ago.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > >
> > >
> > > On Sat, Mar 10, 2018 at 5:37 PM, "Tom Whiteside via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > I had same thing here on our backup node that went into a leaky dummy
> > > load.
> > > > Switched to decent double shielded cable like I would do at a
> repeater
> > > site
> > > > and a good dummy load and has not reoccurred...   Pretty sure my
> issue
> > > was
> > > > RF getting into it but have not run it long enough this way to be
> > totally
> > > > confident this was my problem.   Zero issues with this at our
> repeater
> > > > sites.
> > > >
> > > > Tom N5TW
> > > >
> > > > -----Original Message-----
> > > > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf
> > Of
> > > > "Chris Viningre via arm-allstar"
> > > >
> > > > I have been chasing a problem on my portable node loosing power to
> the
> > > > URIx.
> > > > At first I though it was the USB cable going to the URIx so I
> replaced
> > > it.
> > > > I
> > > > found it to happen more when I have a lost of data service.
> > > > I go through many miles of area that have no cell service. I haven't
> > > > determine how long it takes but for about 40 of my 60 miles commute
> to
> > > work
> > > > I don't have any cell service. Once I get into the city I can SSH
> > through
> > > > my
> > > > phone and recycle the power to the USB and it works again. Do you
> know
> > if
> > > > there something in the software or URIx that shutdown during long
> times
> > > > without internet? Is there some way I can keep it on so it will
> > reconnect
> > > > when I get service?
> > > >
> > > > Chris Viningre
> > > > 70 W. Roadrunner
> > > > Salt Flat, Texas 79847
> > > > C:(915) 504-1510
> > > > chrisviningre at gmail.com
> > > >
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>


More information about the arm-allstar mailing list