[arm-allstar] Remote Base question

[David McGough]

Hi Jamey,

Yes, the HamVoIP image should be able to control the TM-271A, using the 
same rpt.conf syntax as found in the ACID software.

HOWEVER, that code in app_rpt is on the list to be replaced / updated.

Hamlib should control the TM-271A as well. I have a TM-G707 and a TM-281
I'm going to experiment with as soon as time allows. Currently I'm using
MaxTrac radios for remote bases and they work very well---well enough that
the Kenwood project got moved to the "back burner."


73, David KB4FXC




On Sat, 21 Jul 2018, "Jamey Wright via arm-allstar" wrote:

> I am looking at replacing my ACID node running on a PC at the repeater site
> with a Pi3 running the HamVoip image.  I currently have two nodes on the
> ACID PC.  One is connected to a multi-port repeater controller and the other
> is connected to a Kenwood TM-271A and is configured as a frequency-agile
> remote base.
> 
>  
> 
> My question is:  Can the HamVoip distro directly control the TM-271A like
> ACID can?  I can't find it documented anywhere.  HamLib doesn't list it as a
> supported radio either.  An even better option would be the TM-G707 but I'll
> settle for the TM-271A.
> 
>  
> 
> Thanks
> 
>  
> 
> Jamey Wright - WR4JW
> 
>  
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>