[arm-allstar] Remote Base question
Jamey Wright
jamey.wright at charter.net
Sat Jul 21 20:25:06 EST 2018
Control is through a serial port(dev/ttys1) and audio, PTT, COS, is via a
pigtail I added. The board in the 271 has connection points for audio, PTT
and COS. Here are the connection points:
PKS = PTT (active low)
SQC = COS (active high of +5)
PR9 = Receive audio *
PKD = Transmit audio *
Jamey - WR4JW
-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Angelo T Sonnesso via arm-allstar"
Sent: Saturday, July 21, 2018 20:10
To: 'ARM Allstar' <arm-allstar at hamvoip.org>
Cc: Angelo T Sonnesso <asonnesso at gmail.com>
Subject: Re: [arm-allstar] Remote Base question
How are you interfacing to the Kenwood?
I am still very much in the learning stage.
73 N2DYN Angelo
-----Original Message-----
From: arm-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Jamey
Wright via arm-allstar"
Sent: Saturday, July 21, 2018 7:54 PM
To: 'ARM Allstar' <arm-allstar at hamvoip.org>
Cc: Jamey Wright <jamey.wright at charter.net>
Subject: [arm-allstar] Remote Base question
I am looking at replacing my ACID node running on a PC at the repeater site
with a Pi3 running the HamVoip image. I currently have two nodes on the
ACID PC. One is connected to a multi-port repeater controller and the other
is connected to a Kenwood TM-271A and is configured as a frequency-agile
remote base.
My question is: Can the HamVoip distro directly control the TM-271A like
ACID can? I can't find it documented anywhere. HamLib doesn't list it as a
supported radio either. An even better option would be the TM-G707 but I'll
settle for the TM-271A.
Thanks
Jamey Wright - WR4JW
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2/3 web page - http://hamvoip.org
---
This email has been checked for viruses by AVG.
https://www.avg.com
More information about the arm-allstar
mailing list