[arm-allstar] PL Tone

[David]

Doug 
Thanks that answered it perfectly. I will move back to the repeater and see what I can come up with.
Updated 15 nodes 8 private, last I looked 28 hours with 1400 ptt's!
Thanks David KG5RDF
-------- Original message --------From: Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> Date: 7/16/18  9:23 PM  (GMT-06:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Doug Crompton <wa3dsp at gmail.com> Subject: Re: [arm-allstar] PL Tone 
I assume you mean using a decoded PL tone in lieu of a COS signal for indication of RX?  If this is the case then you would need to use  usbradio which is there but just not supported or generally recommended in the hamvoip code. The config fiel is in /etc/asterisk/usbradio.xxx - this file would need to be configured for your radio and the rxchannel line changed in rpt.conf.
There are always ways around this however using hardware like a stand-alone PL decoder driving COS which for now might be a better choice if I am understanding your need.
73 Doug
WA3DSP
http://www.crompton.com/hamradio




On Mon, Jul 16, 2018 at 8:28 PM, "David via arm-allstar" <arm-allstar at hamvoip.org> wrote:


I have not had to use, in a long time, PL Tone control via Allstar node, but ran into a repeater that does not do it in remote mode. 

Where is rxctcssdefault located or its replacement.

Thanks David

_______________________________________________



arm-allstar mailing list

arm-allstar at hamvoip.org

http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar



Visit the BBB and RPi2/3 web page - http://hamvoip.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20180716/b7e19875/attachment.html>