[arm-allstar] arm-allstar Digest, Vol 50, Issue 44
w7jca
w7jca at yahoo.com
Sun Jul 15 21:20:46 EST 2018
Thanks Doug. It eventually works but once I shutdown and restart it won't connect again for a while. I check the registration and dns tommorw.
Thanks for the help
73, john
Sent via the Samsung Galaxy Note® 3, an AT&T 4G LTE smartphone
-------- Original message --------
From: arm-allstar-request at hamvoip.org
Date: 07/15/2018 3:32 PM (GMT-08:00)
To: arm-allstar at hamvoip.org
Subject: arm-allstar Digest, Vol 50, Issue 44
Send arm-allstar mailing list submissions to
arm-allstar at hamvoip.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
or, via email, send a message with subject or body 'help' to
arm-allstar-request at hamvoip.org
You can reach the person managing the list at
arm-allstar-owner at hamvoip.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of arm-allstar digest..."
Today's Topics:
1. Re: New to allstar (Doug Crompton)
2. Re: arm-allstar Digest, Vol 50, Issue 42 (Doug Crompton)
3. Re: New to allstar (Doug Crompton)
----------------------------------------------------------------------
Message: 1
Date: Sun, 15 Jul 2018 17:22:43 -0400
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] New to allstar
Message-ID:
<CAMp6vssq+5SH1+A-NfcqnTEczZDKhKZxOJ7BPu=BUBLQikH8iA at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
John,
You might be up against the same problem many other have been having, not
being able to download the node file. Under our new DNS lookup feature that
is no longer required and I am sending you the instructions to set it up in
a separate email. Let me know how you make out. You also need to check that
you are registered as that could be an issue also. There is a check_reg.sh
script you can run at the Linux prompt to check that.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Sun, Jul 15, 2018 at 3:56 PM, "w7jca via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> I just setup a allstar node. It connected fine for a while then I keyed *70
> and it says my node number and repeat only.
>
> I rebooted a few times then I was able to connect again. Once I shutdown
> the
> system and reboot it happens again and says repeat only.
>
>
>
> Am I missing something? Any help would be appreciated.
>
>
>
> Thank
>
>
>
> John
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
------------------------------
Message: 2
Date: Sun, 15 Jul 2018 17:25:44 -0400
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] arm-allstar Digest, Vol 50, Issue 42
Message-ID:
<CAMp6vsuCGeswAuECtowZuQhY4Ct3ct=E9M7AsOqotgZ5Tvkc7A at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
I have no idea what *980 is?? Is that something you setup? We have no
function like that. Do the DNS changes I sent you and check your
registration as I pointed out.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Sun, Jul 15, 2018 at 4:38 PM, "w7jca via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> I updated to version1.5.3-36. When I look at ADMIN # 10 it displays
> correctly but when I key *980 it says 1.5.3- 27 and it still says repeat
> only and wont connect.
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> arm-allstar-request at hamvoip.org
> Sent: Sunday, July 15, 2018 12:58 PM
> To: arm-allstar at hamvoip.org
> Subject: arm-allstar Digest, Vol 50, Issue 42
>
> Send arm-allstar mailing list submissions to
> arm-allstar at hamvoip.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> or, via email, send a message with subject or body 'help' to
> arm-allstar-request at hamvoip.org
>
> You can reach the person managing the list at
> arm-allstar-owner at hamvoip.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of arm-allstar digest..."
>
>
> Today's Topics:
>
> 1. Re: Zioper: Registration Failed (Registration Refused (29))
> (Doug Crompton)
> 2. Re: Zioper: Registration Failed (Registration Refused (29))
> (Mike Besemer)
> 3. Re: Connect Permanent disconnects (Doug Crompton)
> 4. Re: Zioper: Registration Failed (Registration Refused (29))
> (Lloyd Duck)
> 5. IMPORTANT update!! (Doug Crompton)
> 6. New to allstar (w7jca)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 15 Jul 2018 13:36:33 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: Mike Besemer <mwbesemer at cox.net>, ARM Allstar
> <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused (29))
> Message-ID:
> <CAMp6vsvae_DD1LkH5SntRwpv8RNDw8Z9Mnsrz7Ni0t51ZYof=
> w at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Mike,
>
> I am not sure why it is not working for you. Many others have it working
> fine as well as iaxrpt. I am sure you will find some simple thing. It has
> nothing to do with the Pi which is a workhorse board and thousands are
> using it without any issues. Perhaps someone else using zoiper can chome in
> and give you some help.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Sun, Jul 15, 2018 at 12:42 PM, Mike Besemer <mwbesemer at cox.net> wrote:
>
> > No joy, Doug. I've wasted most of a week on this and it's obviously not
> > going to work. The directions are clear enough (although there are some
> > conflicting versions posted on the net), but no-go.
> >
> > I'm not a moron, but this entire ASL/HamVoIP experience has sure made me
> > feel that way. I'm not sure how the average ham finds the time to work
> his
> > way through this. I've done Motorola repeater conversions in less time
> > than
> > I've invested here.
> >
> > Time to walk away for a while before I use the Pi for target practice.
> >
> > Mike
> > WM4B
> >
> > -----Original Message-----
> > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> > "Doug Crompton via arm-allstar"
> > Sent: Sunday, July 15, 2018 12:50 AM
> > To: ARM Allstar
> > Cc: Doug Crompton
> > Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> > Refused
> > (29))
> >
> > Mike,
> >
> > All examples I have seen have the iax.conf context name and the username
> > in that context set to the same value. Try doing that. I believe the
> > application might use the context name. This is not to be confused with
> the
> > context= parameter which defines the extensions context.
> >
> > So the example could be in iax.conf
> >
> > [iax-zoiper]
> > user=iax-zoiper
> > ....
> > ...
> >
> > Also see -
> >
> > https://hamvoip.org/ConnectZoipertoAllstarNode.pdf
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Sat, Jul 14, 2018 at 10:50 AM, "Mike Besemer via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > That's the frustrating part, Doug... it really looks like it should be
> > > working. I'm setting it up for a friend who is an iphone user; wish
> there
> > > was an iaxrpt app for iphone.
> > >
> > > Here's my stanzas from iax.conf and extensions.conf. I checked for,
> and
> > > eliminated, trailing spaces as suggested by Steve - WB4BXO, with no
> luck.
> > >
> > > [myphone]
> > > username=zoiper
> > > type=friend
> > > context=myphone
> > > host=dynamic
> > > auth=md5
> > > secret=48166
> > > disallow=all
> > > allow=ulaw
> > > allow=g726aal2
> > > allow=gsm
> > > codecpriority=host
> > > transfer=no
> > > callerid=WM4B
> > >
> > >
> > > [myphone]
> > > exten => 48166,1,answer()
> > > exten => 48166,n,Playback(rpt/node)
> > > exten => 48166,n,Playback(digits/4)
> > > exten => 48166,n,Playback(digits/1)
> > > exten => 48166,n,Playback(digits/7)
> > > exten => 48166,n,Playback(digits/6)
> > > exten => 48166,n,Playback(digits/4)
> > > exten => 48166,n,Playback(rpt/connected)
> > > exten => 48166,n,rpt(48166|Pv)
> > >
> > > Mike
> > > WM4B
> > >
> > > -----Original Message-----
> > > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf
> Of
> > > "Doug Crompton via arm-allstar"
> > > Sent: Friday, July 13, 2018 3:24 PM
> > > To: ARM Allstar
> > > Cc: Doug Crompton
> > > Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> > > Refused
> > > (29))
> > >
> > > Mike,
> > >
> > > There would be absolutely nothing different in hamvoip as long as you
> > are
> > > using the same iax and extensions stanzas. That would indicate that
> > either
> > > the username or password are not correct. If you are using an Android
> > > device then you should checkout iaxrpt for that. Howto's for that and
> > > zopier at the hamvoip.org site.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > >
> > > On Fri, Jul 13, 2018 at 1:58 PM, "Mike Besemer - WM4B via arm-allstar"
> <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Hi all,
> > > >
> > > > I'm having an issue getting Zoiper to work with HamVoIP.
> > > >
> > > > Been through the setup on the website a half-dozen times with no
> luck.
> > > >
> > > > IAXRPT works fine, so it isn't a port issue.
> > > >
> > > > Zioper also works fine on my ASL build.
> > > >
> > > > Zioper reports: Registration Failed (Registration Refused (29))
> > > >
> > > > Mike
> > > > WM4B
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 15 Jul 2018 12:42:28 -0400
> From: "Mike Besemer" <mwbesemer at cox.net>
> To: "'ARM Allstar'" <arm-allstar at hamvoip.org>
> Cc: "'Doug Crompton'" <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused (29))
> Message-ID: <000c01d41c5a$d19abb40$74d031c0$@cox.net>
> Content-Type: text/plain; charset="us-ascii"
>
> No joy, Doug. I've wasted most of a week on this and it's obviously not
> going to work. The directions are clear enough (although there are some
> conflicting versions posted on the net), but no-go.
>
> I'm not a moron, but this entire ASL/HamVoIP experience has sure made me
> feel that way. I'm not sure how the average ham finds the time to work his
> way through this. I've done Motorola repeater conversions in less time
> than
> I've invested here.
>
> Time to walk away for a while before I use the Pi for target practice.
>
> Mike
> WM4B
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Sunday, July 15, 2018 12:50 AM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused
> (29))
>
> Mike,
>
> All examples I have seen have the iax.conf context name and the username
> in that context set to the same value. Try doing that. I believe the
> application might use the context name. This is not to be confused with the
> context= parameter which defines the extensions context.
>
> So the example could be in iax.conf
>
> [iax-zoiper]
> user=iax-zoiper
> ....
> ...
>
> Also see -
>
> https://hamvoip.org/ConnectZoipertoAllstarNode.pdf
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Jul 14, 2018 at 10:50 AM, "Mike Besemer via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > That's the frustrating part, Doug... it really looks like it should be
> > working. I'm setting it up for a friend who is an iphone user; wish there
> > was an iaxrpt app for iphone.
> >
> > Here's my stanzas from iax.conf and extensions.conf. I checked for, and
> > eliminated, trailing spaces as suggested by Steve - WB4BXO, with no luck.
> >
> > [myphone]
> > username=zoiper
> > type=friend
> > context=myphone
> > host=dynamic
> > auth=md5
> > secret=48166
> > disallow=all
> > allow=ulaw
> > allow=g726aal2
> > allow=gsm
> > codecpriority=host
> > transfer=no
> > callerid=WM4B
> >
> >
> > [myphone]
> > exten => 48166,1,answer()
> > exten => 48166,n,Playback(rpt/node)
> > exten => 48166,n,Playback(digits/4)
> > exten => 48166,n,Playback(digits/1)
> > exten => 48166,n,Playback(digits/7)
> > exten => 48166,n,Playback(digits/6)
> > exten => 48166,n,Playback(digits/4)
> > exten => 48166,n,Playback(rpt/connected)
> > exten => 48166,n,rpt(48166|Pv)
> >
> > Mike
> > WM4B
> >
> > -----Original Message-----
> > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> > "Doug Crompton via arm-allstar"
> > Sent: Friday, July 13, 2018 3:24 PM
> > To: ARM Allstar
> > Cc: Doug Crompton
> > Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> > Refused
> > (29))
> >
> > Mike,
> >
> > There would be absolutely nothing different in hamvoip as long as you
> are
> > using the same iax and extensions stanzas. That would indicate that
> either
> > the username or password are not correct. If you are using an Android
> > device then you should checkout iaxrpt for that. Howto's for that and
> > zopier at the hamvoip.org site.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Fri, Jul 13, 2018 at 1:58 PM, "Mike Besemer - WM4B via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Hi all,
> > >
> > > I'm having an issue getting Zoiper to work with HamVoIP.
> > >
> > > Been through the setup on the website a half-dozen times with no luck.
> > >
> > > IAXRPT works fine, so it isn't a port issue.
> > >
> > > Zioper also works fine on my ASL build.
> > >
> > > Zioper reports: Registration Failed (Registration Refused (29))
> > >
> > > Mike
> > > WM4B
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 15 Jul 2018 13:40:31 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Connect Permanent disconnects
> Message-ID:
> <CAMp6vsuiiiHKBRndEuHZNXBraqL2A9mJ9NYz9dF_rMfo-TBQwQ at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Logan,
>
> This is a real problem that we are working on and will have a solution for
> this afternoon. The prior sanity checks for crashes and core dumps which
> was proper code has disclosed yet another problem in the original Allstar
> code involving memory allocation. Once we get this fixed there will be an
> update to correct the problem and more detail on the issue. The end result
> will be yet again better Allstar code!
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
>
> On Sun, Jul 15, 2018 at 8:21 AM, "Logan Crook via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hello to the group,
> >
> > I was curious if anyone has the problem with Permanent Connection when
> > connecting to a node and disconnects? I've been noticing that during the
> > last 2 updates that I connect to my own system with AllStar Nodes when I
> > used *7342121 to connect my hub when I look on Supermon to connect
> > permanent it is connected when I do a restart on my hub node or I do a
> > reboot on my hub it disconnects the 42121 when it was connected
> permanent.
> >
> > 73 Logan
> > K8LRC
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>
> ------------------------------
>
> Message: 4
> Date: Sun, 15 Jul 2018 13:17:06 -0500
> From: Lloyd Duck <lduck at me.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Mike Besemer <mwbesemer at cox.net>, Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused (29))
> Message-ID: <D28D52A8-45EB-424C-BBEE-0082D4FF5D6A at me.com>
> Content-Type: text/plain; charset=us-ascii
>
> Mike,
>
> Just wondering in the Zoiper under settings and Server. Are you putting
> ipaddress:4569?
>
> I do have mine working and it did take a few days of walking off and
> counting to 100,000 not the shot the pi.
>
>
>
> On Jul 15, 2018, at 11:42 AM, Mike Besemer via arm-allstar
> <arm-allstar at hamvoip.org> wrote:
>
> No joy, Doug. I've wasted most of a week on this and it's obviously not
> going to work. The directions are clear enough (although there are some
> conflicting versions posted on the net), but no-go.
>
> I'm not a moron, but this entire ASL/HamVoIP experience has sure made me
> feel that way. I'm not sure how the average ham finds the time to work his
> way through this. I've done Motorola repeater conversions in less time
> than
> I've invested here.
>
> Time to walk away for a while before I use the Pi for target practice.
>
> Mike
> WM4B
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Sunday, July 15, 2018 12:50 AM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused
> (29))
>
> Mike,
>
> All examples I have seen have the iax.conf context name and the username
> in that context set to the same value. Try doing that. I believe the
> application might use the context name. This is not to be confused with the
> context= parameter which defines the extensions context.
>
> So the example could be in iax.conf
>
> [iax-zoiper]
> user=iax-zoiper
> ....
> ...
>
> Also see -
>
> https://hamvoip.org/ConnectZoipertoAllstarNode.pdf
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Jul 14, 2018 at 10:50 AM, "Mike Besemer via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > That's the frustrating part, Doug... it really looks like it should be
> > working. I'm setting it up for a friend who is an iphone user; wish there
> > was an iaxrpt app for iphone.
> >
> > Here's my stanzas from iax.conf and extensions.conf. I checked for, and
> > eliminated, trailing spaces as suggested by Steve - WB4BXO, with no luck.
> >
> > [myphone]
> > username=zoiper
> > type=friend
> > context=myphone
> > host=dynamic
> > auth=md5
> > secret=48166
> > disallow=all
> > allow=ulaw
> > allow=g726aal2
> > allow=gsm
> > codecpriority=host
> > transfer=no
> > callerid=WM4B
> >
> >
> > [myphone]
> > exten => 48166,1,answer()
> > exten => 48166,n,Playback(rpt/node)
> > exten => 48166,n,Playback(digits/4)
> > exten => 48166,n,Playback(digits/1)
> > exten => 48166,n,Playback(digits/7)
> > exten => 48166,n,Playback(digits/6)
> > exten => 48166,n,Playback(digits/4)
> > exten => 48166,n,Playback(rpt/connected)
> > exten => 48166,n,rpt(48166|Pv)
> >
> > Mike
> > WM4B
> >
> > -----Original Message-----
> > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> > "Doug Crompton via arm-allstar"
> > Sent: Friday, July 13, 2018 3:24 PM
> > To: ARM Allstar
> > Cc: Doug Crompton
> > Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> > Refused
> > (29))
> >
> > Mike,
> >
> > There would be absolutely nothing different in hamvoip as long as you are
> > using the same iax and extensions stanzas. That would indicate that
> either
> > the username or password are not correct. If you are using an Android
> > device then you should checkout iaxrpt for that. Howto's for that and
> > zopier at the hamvoip.org site.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Fri, Jul 13, 2018 at 1:58 PM, "Mike Besemer - WM4B via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> Hi all,
> >>
> >> I'm having an issue getting Zoiper to work with HamVoIP.
> >>
> >> Been through the setup on the website a half-dozen times with no luck.
> >>
> >> IAXRPT works fine, so it isn't a port issue.
> >>
> >> Zioper also works fine on my ASL build.
> >>
> >> Zioper reports: Registration Failed (Registration Refused (29))
> >>
> >> Mike
> >> WM4B
> >> _______________________________________________
> >>
> >> arm-allstar mailing list
> >> arm-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
> ------------------------------
>
> Message: 5
> Date: Sun, 15 Jul 2018 14:47:45 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] IMPORTANT update!!
> Message-ID:
> <CAMp6vssXDeLkgirPL_2HKrVnw32U5kPBGEYsbjszAp2T7s=P
> dg at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> An update to correct crashes and potential core dumps on 7/02 has unearthed
> yet another memory allocation problem in the original Allstar code. The
> sanity checks we added for memory allocation prevented a potential problem
> from happening but as a result also prevented the reconnect mechanism from
> working. The problem was the release of memory without setting it to null.
> This is bad programming practice and while it might not cause a problem a
> large percentage of the time, with the right conditions it will eventually
> cause a crash. Undoubtedly we will find more of these problems in Allstar
> in the future and correct them making the hamvoip package continually more
> stable.
>
> If you are using update V1.5.3-34 or V1.5.3-35 please update ASAP to
> correct this problem. The latest version is - V1.5.3-36. Users with
> versions earlier then V1.5.3-34 should also update to take advantage of the
> more robust code and crash prevention.
>
> Use the ADMIN menu item 1 to update.
>
> Sorry for the inconvenience but you can be assured we are doing our best to
> improve the hamvoip Allstar code and we will continue to correct any known
> problems. This is why it is important for you to let us know if you are
> experiencing any issues.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
>
> Message: 6
> Date: Sun, 15 Jul 2018 12:56:23 -0700
> From: "w7jca" <w7jca at yahoo.com>
> To: <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] New to allstar
> Message-ID: <000501d41c75$e8ddd330$ba997990$@yahoo.com>
> Content-Type: text/plain; charset="us-ascii"
>
> I just setup a allstar node. It connected fine for a while then I keyed *70
> and it says my node number and repeat only.
>
> I rebooted a few times then I was able to connect again. Once I shutdown
> the
> system and reboot it happens again and says repeat only.
>
>
>
> Am I missing something? Any help would be appreciated.
>
>
>
> Thank
>
>
>
> John
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of arm-allstar Digest, Vol 50, Issue 42
> *******************************************
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
------------------------------
Message: 3
Date: Sun, 15 Jul 2018 18:32:30 -0400
From: Doug Crompton <wa3dsp at gmail.com>
To: Mike Besemer <mwbesemer at cox.net>, ARM Allstar
<arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] New to allstar
Message-ID:
<CAMp6vssEmE+VsoESwJum_gZeCv8mjcRisf_LdnWg-1+tKJuoFg at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
hamvoip operates in user root. You should have as part of the stock install
-
crontab -l
# Do not remove the following line
# required for lsnodes and allmon
15 03 * * * cd /usr/local/sbin; ./astdb.php cron
00 0-23 * * * (source /usr/local/etc/allstar.env ; /usr/bin/nice -19
/usr/bin/perl /usr/local/sbin/saytime.pl 18954 $NODE1 > /dev/null)
This is in every installation unless you took it out.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Sun, Jul 15, 2018 at 6:10 PM, Mike Besemer <mwbesemer at cox.net> wrote:
> Doug,
>
> How DOES one download the node file? In my ASL image, I have a cron set up
> to run astdb.php once daily. I don't see that file anywhere in my HamVoIP
> installation.
>
> Mike
> WM4B
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Sunday, July 15, 2018 5:23 PM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] New to allstar
>
> John,
>
> You might be up against the same problem many other have been having, not
> being able to download the node file. Under our new DNS lookup feature that
> is no longer required and I am sending you the instructions to set it up in
> a separate email. Let me know how you make out. You also need to check that
> you are registered as that could be an issue also. There is a check_reg.sh
> script you can run at the Linux prompt to check that.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sun, Jul 15, 2018 at 3:56 PM, "w7jca via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I just setup a allstar node. It connected fine for a while then I keyed
> *70
> > and it says my node number and repeat only.
> >
> > I rebooted a few times then I was able to connect again. Once I shutdown
> > the
> > system and reboot it happens again and says repeat only.
> >
> >
> >
> > Am I missing something? Any help would be appreciated.
> >
> >
> >
> > Thank
> >
> >
> >
> > John
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
------------------------------
Subject: Digest Footer
_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
------------------------------
End of arm-allstar Digest, Vol 50, Issue 44
*******************************************
More information about the arm-allstar
mailing list