[arm-allstar] arm-allstar Digest, Vol 50, Issue 42
Doug Crompton
wa3dsp at gmail.com
Sun Jul 15 16:25:44 EST 2018
I have no idea what *980 is?? Is that something you setup? We have no
function like that. Do the DNS changes I sent you and check your
registration as I pointed out.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Sun, Jul 15, 2018 at 4:38 PM, "w7jca via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> I updated to version1.5.3-36. When I look at ADMIN # 10 it displays
> correctly but when I key *980 it says 1.5.3- 27 and it still says repeat
> only and wont connect.
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> arm-allstar-request at hamvoip.org
> Sent: Sunday, July 15, 2018 12:58 PM
> To: arm-allstar at hamvoip.org
> Subject: arm-allstar Digest, Vol 50, Issue 42
>
> Send arm-allstar mailing list submissions to
> arm-allstar at hamvoip.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> or, via email, send a message with subject or body 'help' to
> arm-allstar-request at hamvoip.org
>
> You can reach the person managing the list at
> arm-allstar-owner at hamvoip.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of arm-allstar digest..."
>
>
> Today's Topics:
>
> 1. Re: Zioper: Registration Failed (Registration Refused (29))
> (Doug Crompton)
> 2. Re: Zioper: Registration Failed (Registration Refused (29))
> (Mike Besemer)
> 3. Re: Connect Permanent disconnects (Doug Crompton)
> 4. Re: Zioper: Registration Failed (Registration Refused (29))
> (Lloyd Duck)
> 5. IMPORTANT update!! (Doug Crompton)
> 6. New to allstar (w7jca)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 15 Jul 2018 13:36:33 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: Mike Besemer <mwbesemer at cox.net>, ARM Allstar
> <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused (29))
> Message-ID:
> <CAMp6vsvae_DD1LkH5SntRwpv8RNDw8Z9Mnsrz7Ni0t51ZYof=
> w at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Mike,
>
> I am not sure why it is not working for you. Many others have it working
> fine as well as iaxrpt. I am sure you will find some simple thing. It has
> nothing to do with the Pi which is a workhorse board and thousands are
> using it without any issues. Perhaps someone else using zoiper can chome in
> and give you some help.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Sun, Jul 15, 2018 at 12:42 PM, Mike Besemer <mwbesemer at cox.net> wrote:
>
> > No joy, Doug. I've wasted most of a week on this and it's obviously not
> > going to work. The directions are clear enough (although there are some
> > conflicting versions posted on the net), but no-go.
> >
> > I'm not a moron, but this entire ASL/HamVoIP experience has sure made me
> > feel that way. I'm not sure how the average ham finds the time to work
> his
> > way through this. I've done Motorola repeater conversions in less time
> > than
> > I've invested here.
> >
> > Time to walk away for a while before I use the Pi for target practice.
> >
> > Mike
> > WM4B
> >
> > -----Original Message-----
> > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> > "Doug Crompton via arm-allstar"
> > Sent: Sunday, July 15, 2018 12:50 AM
> > To: ARM Allstar
> > Cc: Doug Crompton
> > Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> > Refused
> > (29))
> >
> > Mike,
> >
> > All examples I have seen have the iax.conf context name and the username
> > in that context set to the same value. Try doing that. I believe the
> > application might use the context name. This is not to be confused with
> the
> > context= parameter which defines the extensions context.
> >
> > So the example could be in iax.conf
> >
> > [iax-zoiper]
> > user=iax-zoiper
> > ....
> > ...
> >
> > Also see -
> >
> > https://hamvoip.org/ConnectZoipertoAllstarNode.pdf
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Sat, Jul 14, 2018 at 10:50 AM, "Mike Besemer via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > That's the frustrating part, Doug... it really looks like it should be
> > > working. I'm setting it up for a friend who is an iphone user; wish
> there
> > > was an iaxrpt app for iphone.
> > >
> > > Here's my stanzas from iax.conf and extensions.conf. I checked for,
> and
> > > eliminated, trailing spaces as suggested by Steve - WB4BXO, with no
> luck.
> > >
> > > [myphone]
> > > username=zoiper
> > > type=friend
> > > context=myphone
> > > host=dynamic
> > > auth=md5
> > > secret=48166
> > > disallow=all
> > > allow=ulaw
> > > allow=g726aal2
> > > allow=gsm
> > > codecpriority=host
> > > transfer=no
> > > callerid=WM4B
> > >
> > >
> > > [myphone]
> > > exten => 48166,1,answer()
> > > exten => 48166,n,Playback(rpt/node)
> > > exten => 48166,n,Playback(digits/4)
> > > exten => 48166,n,Playback(digits/1)
> > > exten => 48166,n,Playback(digits/7)
> > > exten => 48166,n,Playback(digits/6)
> > > exten => 48166,n,Playback(digits/4)
> > > exten => 48166,n,Playback(rpt/connected)
> > > exten => 48166,n,rpt(48166|Pv)
> > >
> > > Mike
> > > WM4B
> > >
> > > -----Original Message-----
> > > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf
> Of
> > > "Doug Crompton via arm-allstar"
> > > Sent: Friday, July 13, 2018 3:24 PM
> > > To: ARM Allstar
> > > Cc: Doug Crompton
> > > Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> > > Refused
> > > (29))
> > >
> > > Mike,
> > >
> > > There would be absolutely nothing different in hamvoip as long as you
> > are
> > > using the same iax and extensions stanzas. That would indicate that
> > either
> > > the username or password are not correct. If you are using an Android
> > > device then you should checkout iaxrpt for that. Howto's for that and
> > > zopier at the hamvoip.org site.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > >
> > > On Fri, Jul 13, 2018 at 1:58 PM, "Mike Besemer - WM4B via arm-allstar"
> <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Hi all,
> > > >
> > > > I'm having an issue getting Zoiper to work with HamVoIP.
> > > >
> > > > Been through the setup on the website a half-dozen times with no
> luck.
> > > >
> > > > IAXRPT works fine, so it isn't a port issue.
> > > >
> > > > Zioper also works fine on my ASL build.
> > > >
> > > > Zioper reports: Registration Failed (Registration Refused (29))
> > > >
> > > > Mike
> > > > WM4B
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 15 Jul 2018 12:42:28 -0400
> From: "Mike Besemer" <mwbesemer at cox.net>
> To: "'ARM Allstar'" <arm-allstar at hamvoip.org>
> Cc: "'Doug Crompton'" <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused (29))
> Message-ID: <000c01d41c5a$d19abb40$74d031c0$@cox.net>
> Content-Type: text/plain; charset="us-ascii"
>
> No joy, Doug. I've wasted most of a week on this and it's obviously not
> going to work. The directions are clear enough (although there are some
> conflicting versions posted on the net), but no-go.
>
> I'm not a moron, but this entire ASL/HamVoIP experience has sure made me
> feel that way. I'm not sure how the average ham finds the time to work his
> way through this. I've done Motorola repeater conversions in less time
> than
> I've invested here.
>
> Time to walk away for a while before I use the Pi for target practice.
>
> Mike
> WM4B
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Sunday, July 15, 2018 12:50 AM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused
> (29))
>
> Mike,
>
> All examples I have seen have the iax.conf context name and the username
> in that context set to the same value. Try doing that. I believe the
> application might use the context name. This is not to be confused with the
> context= parameter which defines the extensions context.
>
> So the example could be in iax.conf
>
> [iax-zoiper]
> user=iax-zoiper
> ....
> ...
>
> Also see -
>
> https://hamvoip.org/ConnectZoipertoAllstarNode.pdf
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Jul 14, 2018 at 10:50 AM, "Mike Besemer via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > That's the frustrating part, Doug... it really looks like it should be
> > working. I'm setting it up for a friend who is an iphone user; wish there
> > was an iaxrpt app for iphone.
> >
> > Here's my stanzas from iax.conf and extensions.conf. I checked for, and
> > eliminated, trailing spaces as suggested by Steve - WB4BXO, with no luck.
> >
> > [myphone]
> > username=zoiper
> > type=friend
> > context=myphone
> > host=dynamic
> > auth=md5
> > secret=48166
> > disallow=all
> > allow=ulaw
> > allow=g726aal2
> > allow=gsm
> > codecpriority=host
> > transfer=no
> > callerid=WM4B
> >
> >
> > [myphone]
> > exten => 48166,1,answer()
> > exten => 48166,n,Playback(rpt/node)
> > exten => 48166,n,Playback(digits/4)
> > exten => 48166,n,Playback(digits/1)
> > exten => 48166,n,Playback(digits/7)
> > exten => 48166,n,Playback(digits/6)
> > exten => 48166,n,Playback(digits/4)
> > exten => 48166,n,Playback(rpt/connected)
> > exten => 48166,n,rpt(48166|Pv)
> >
> > Mike
> > WM4B
> >
> > -----Original Message-----
> > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> > "Doug Crompton via arm-allstar"
> > Sent: Friday, July 13, 2018 3:24 PM
> > To: ARM Allstar
> > Cc: Doug Crompton
> > Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> > Refused
> > (29))
> >
> > Mike,
> >
> > There would be absolutely nothing different in hamvoip as long as you
> are
> > using the same iax and extensions stanzas. That would indicate that
> either
> > the username or password are not correct. If you are using an Android
> > device then you should checkout iaxrpt for that. Howto's for that and
> > zopier at the hamvoip.org site.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Fri, Jul 13, 2018 at 1:58 PM, "Mike Besemer - WM4B via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Hi all,
> > >
> > > I'm having an issue getting Zoiper to work with HamVoIP.
> > >
> > > Been through the setup on the website a half-dozen times with no luck.
> > >
> > > IAXRPT works fine, so it isn't a port issue.
> > >
> > > Zioper also works fine on my ASL build.
> > >
> > > Zioper reports: Registration Failed (Registration Refused (29))
> > >
> > > Mike
> > > WM4B
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 15 Jul 2018 13:40:31 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Connect Permanent disconnects
> Message-ID:
> <CAMp6vsuiiiHKBRndEuHZNXBraqL2A9mJ9NYz9dF_rMfo-TBQwQ at mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Logan,
>
> This is a real problem that we are working on and will have a solution for
> this afternoon. The prior sanity checks for crashes and core dumps which
> was proper code has disclosed yet another problem in the original Allstar
> code involving memory allocation. Once we get this fixed there will be an
> update to correct the problem and more detail on the issue. The end result
> will be yet again better Allstar code!
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
>
> On Sun, Jul 15, 2018 at 8:21 AM, "Logan Crook via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hello to the group,
> >
> > I was curious if anyone has the problem with Permanent Connection when
> > connecting to a node and disconnects? I've been noticing that during the
> > last 2 updates that I connect to my own system with AllStar Nodes when I
> > used *7342121 to connect my hub when I look on Supermon to connect
> > permanent it is connected when I do a restart on my hub node or I do a
> > reboot on my hub it disconnects the 42121 when it was connected
> permanent.
> >
> > 73 Logan
> > K8LRC
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>
> ------------------------------
>
> Message: 4
> Date: Sun, 15 Jul 2018 13:17:06 -0500
> From: Lloyd Duck <lduck at me.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Mike Besemer <mwbesemer at cox.net>, Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused (29))
> Message-ID: <D28D52A8-45EB-424C-BBEE-0082D4FF5D6A at me.com>
> Content-Type: text/plain; charset=us-ascii
>
> Mike,
>
> Just wondering in the Zoiper under settings and Server. Are you putting
> ipaddress:4569?
>
> I do have mine working and it did take a few days of walking off and
> counting to 100,000 not the shot the pi.
>
>
>
> On Jul 15, 2018, at 11:42 AM, Mike Besemer via arm-allstar
> <arm-allstar at hamvoip.org> wrote:
>
> No joy, Doug. I've wasted most of a week on this and it's obviously not
> going to work. The directions are clear enough (although there are some
> conflicting versions posted on the net), but no-go.
>
> I'm not a moron, but this entire ASL/HamVoIP experience has sure made me
> feel that way. I'm not sure how the average ham finds the time to work his
> way through this. I've done Motorola repeater conversions in less time
> than
> I've invested here.
>
> Time to walk away for a while before I use the Pi for target practice.
>
> Mike
> WM4B
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Sunday, July 15, 2018 12:50 AM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused
> (29))
>
> Mike,
>
> All examples I have seen have the iax.conf context name and the username
> in that context set to the same value. Try doing that. I believe the
> application might use the context name. This is not to be confused with the
> context= parameter which defines the extensions context.
>
> So the example could be in iax.conf
>
> [iax-zoiper]
> user=iax-zoiper
> ....
> ...
>
> Also see -
>
> https://hamvoip.org/ConnectZoipertoAllstarNode.pdf
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Jul 14, 2018 at 10:50 AM, "Mike Besemer via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > That's the frustrating part, Doug... it really looks like it should be
> > working. I'm setting it up for a friend who is an iphone user; wish there
> > was an iaxrpt app for iphone.
> >
> > Here's my stanzas from iax.conf and extensions.conf. I checked for, and
> > eliminated, trailing spaces as suggested by Steve - WB4BXO, with no luck.
> >
> > [myphone]
> > username=zoiper
> > type=friend
> > context=myphone
> > host=dynamic
> > auth=md5
> > secret=48166
> > disallow=all
> > allow=ulaw
> > allow=g726aal2
> > allow=gsm
> > codecpriority=host
> > transfer=no
> > callerid=WM4B
> >
> >
> > [myphone]
> > exten => 48166,1,answer()
> > exten => 48166,n,Playback(rpt/node)
> > exten => 48166,n,Playback(digits/4)
> > exten => 48166,n,Playback(digits/1)
> > exten => 48166,n,Playback(digits/7)
> > exten => 48166,n,Playback(digits/6)
> > exten => 48166,n,Playback(digits/4)
> > exten => 48166,n,Playback(rpt/connected)
> > exten => 48166,n,rpt(48166|Pv)
> >
> > Mike
> > WM4B
> >
> > -----Original Message-----
> > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> > "Doug Crompton via arm-allstar"
> > Sent: Friday, July 13, 2018 3:24 PM
> > To: ARM Allstar
> > Cc: Doug Crompton
> > Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> > Refused
> > (29))
> >
> > Mike,
> >
> > There would be absolutely nothing different in hamvoip as long as you are
> > using the same iax and extensions stanzas. That would indicate that
> either
> > the username or password are not correct. If you are using an Android
> > device then you should checkout iaxrpt for that. Howto's for that and
> > zopier at the hamvoip.org site.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Fri, Jul 13, 2018 at 1:58 PM, "Mike Besemer - WM4B via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> Hi all,
> >>
> >> I'm having an issue getting Zoiper to work with HamVoIP.
> >>
> >> Been through the setup on the website a half-dozen times with no luck.
> >>
> >> IAXRPT works fine, so it isn't a port issue.
> >>
> >> Zioper also works fine on my ASL build.
> >>
> >> Zioper reports: Registration Failed (Registration Refused (29))
> >>
> >> Mike
> >> WM4B
> >> _______________________________________________
> >>
> >> arm-allstar mailing list
> >> arm-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >>
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
> ------------------------------
>
> Message: 5
> Date: Sun, 15 Jul 2018 14:47:45 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] IMPORTANT update!!
> Message-ID:
> <CAMp6vssXDeLkgirPL_2HKrVnw32U5kPBGEYsbjszAp2T7s=P
> dg at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> An update to correct crashes and potential core dumps on 7/02 has unearthed
> yet another memory allocation problem in the original Allstar code. The
> sanity checks we added for memory allocation prevented a potential problem
> from happening but as a result also prevented the reconnect mechanism from
> working. The problem was the release of memory without setting it to null.
> This is bad programming practice and while it might not cause a problem a
> large percentage of the time, with the right conditions it will eventually
> cause a crash. Undoubtedly we will find more of these problems in Allstar
> in the future and correct them making the hamvoip package continually more
> stable.
>
> If you are using update V1.5.3-34 or V1.5.3-35 please update ASAP to
> correct this problem. The latest version is - V1.5.3-36. Users with
> versions earlier then V1.5.3-34 should also update to take advantage of the
> more robust code and crash prevention.
>
> Use the ADMIN menu item 1 to update.
>
> Sorry for the inconvenience but you can be assured we are doing our best to
> improve the hamvoip Allstar code and we will continue to correct any known
> problems. This is why it is important for you to let us know if you are
> experiencing any issues.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
>
> Message: 6
> Date: Sun, 15 Jul 2018 12:56:23 -0700
> From: "w7jca" <w7jca at yahoo.com>
> To: <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] New to allstar
> Message-ID: <000501d41c75$e8ddd330$ba997990$@yahoo.com>
> Content-Type: text/plain; charset="us-ascii"
>
> I just setup a allstar node. It connected fine for a while then I keyed *70
> and it says my node number and repeat only.
>
> I rebooted a few times then I was able to connect again. Once I shutdown
> the
> system and reboot it happens again and says repeat only.
>
>
>
> Am I missing something? Any help would be appreciated.
>
>
>
> Thank
>
>
>
> John
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of arm-allstar Digest, Vol 50, Issue 42
> *******************************************
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
More information about the arm-allstar
mailing list