[arm-allstar] arm-allstar Digest, Vol 50, Issue 42

Sun Jul 15 15:38:04 EST 2018

I updated to version1.5.3-36. When I look at ADMIN # 10 it displays
correctly but when I key *980 it says 1.5.3- 27 and it still says repeat
only and wont connect.

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
arm-allstar-request at hamvoip.org
Sent: Sunday, July 15, 2018 12:58 PM
To: arm-allstar at hamvoip.org
Subject: arm-allstar Digest, Vol 50, Issue 42

Send arm-allstar mailing list submissions to
	arm-allstar at hamvoip.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
or, via email, send a message with subject or body 'help' to
	arm-allstar-request at hamvoip.org

You can reach the person managing the list at
	arm-allstar-owner at hamvoip.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of arm-allstar digest..."

Today's Topics:

   1. Re: Zioper: Registration Failed (Registration Refused (29))
      (Doug Crompton)
   2. Re: Zioper: Registration Failed (Registration Refused (29))
      (Mike Besemer)
   3. Re: Connect Permanent disconnects (Doug Crompton)
   4. Re: Zioper: Registration Failed (Registration Refused (29))
      (Lloyd Duck)
   5. IMPORTANT update!! (Doug Crompton)
   6. New to allstar (w7jca)

----------------------------------------------------------------------

Message: 1
Date: Sun, 15 Jul 2018 13:36:33 -0400
From: Doug Crompton <wa3dsp at gmail.com>
To: Mike Besemer <mwbesemer at cox.net>, ARM Allstar
	<arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
	Refused (29))
Message-ID:
	<CAMp6vsvae_DD1LkH5SntRwpv8RNDw8Z9Mnsrz7Ni0t51ZYof=w at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Mike,

 I am not sure why it is not working for you. Many others have it working
fine as well as iaxrpt. I am sure you will find some simple thing. It has
nothing to do with the Pi which is a workhorse board and thousands are
using it without any issues. Perhaps someone else using zoiper can chome in
and give you some help.

*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sun, Jul 15, 2018 at 12:42 PM, Mike Besemer <mwbesemer at cox.net> wrote:

> No joy, Doug.  I've wasted most of a week on this and it's obviously not
> going to work.  The directions are clear enough (although there are some
> conflicting versions posted on the net), but no-go.
>
> I'm not a moron, but this entire ASL/HamVoIP experience has sure made me
> feel that way.  I'm not sure how the average ham finds the time to work
his
> way through this.  I've done Motorola repeater conversions in less time
> than
> I've invested here.
>
> Time to walk away for a while before I use the Pi for target practice.
>
> Mike
> WM4B
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Sunday, July 15, 2018 12:50 AM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused
> (29))
>
> Mike,
>
>  All examples I have seen have the iax.conf context name and the username
> in that context set to the same value. Try doing that. I believe the
> application might use the context name. This is not to be confused with
the
> context= parameter which defines the extensions context.
>
> So the example could be in iax.conf
>
> [iax-zoiper]
> user=iax-zoiper
> ....
> ...
>
> Also see -
>
> https://hamvoip.org/ConnectZoipertoAllstarNode.pdf
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Jul 14, 2018 at 10:50 AM, "Mike Besemer via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > That's the frustrating part, Doug... it really looks like it should be
> > working. I'm setting it up for a friend who is an iphone user; wish
there
> > was an iaxrpt app for iphone.
> >
> > Here's my stanzas from iax.conf and extensions.conf.  I checked for, and
> > eliminated, trailing spaces as suggested by Steve - WB4BXO, with no
luck.
> >
> > [myphone]
> > username=zoiper
> > type=friend
> > context=myphone
> > host=dynamic
> > auth=md5
> > secret=48166
> > disallow=all
> > allow=ulaw
> > allow=g726aal2
> > allow=gsm
> > codecpriority=host
> > transfer=no
> > callerid=WM4B
> >
> >
> > [myphone]
> > exten => 48166,1,answer()
> > exten => 48166,n,Playback(rpt/node)
> > exten => 48166,n,Playback(digits/4)
> > exten => 48166,n,Playback(digits/1)
> > exten => 48166,n,Playback(digits/7)
> > exten => 48166,n,Playback(digits/6)
> > exten => 48166,n,Playback(digits/4)
> > exten => 48166,n,Playback(rpt/connected)
> > exten => 48166,n,rpt(48166|Pv)
> >
> > Mike
> > WM4B
> >
> > -----Original Message-----
> > From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> > "Doug Crompton via arm-allstar"
> > Sent: Friday, July 13, 2018 3:24 PM
> > To: ARM Allstar
> > Cc: Doug Crompton
> > Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> > Refused
> > (29))
> >
> > Mike,
> >
> >  There would be absolutely nothing different in hamvoip as long as you
> are
> > using the same iax and extensions stanzas. That would indicate that
> either
> > the username or password are not correct. If you are using an Android
> > device then you should checkout iaxrpt for that. Howto's for that and
> > zopier at the hamvoip.org site.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Fri, Jul 13, 2018 at 1:58 PM, "Mike Besemer - WM4B via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Hi all,
> > >
> > > I'm having an issue getting Zoiper to work with HamVoIP.
> > >
> > > Been through the setup on the website a half-dozen times with no luck.
> > >
> > > IAXRPT works fine, so it isn't a port issue.
> > >
> > > Zioper also works fine on my ASL build.
> > >
> > > Zioper reports: Registration Failed (Registration Refused (29))
> > >
> > > Mike
> > > WM4B
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>

------------------------------

Message: 2
Date: Sun, 15 Jul 2018 12:42:28 -0400
From: "Mike Besemer" <mwbesemer at cox.net>
To: "'ARM Allstar'" <arm-allstar at hamvoip.org>
Cc: "'Doug Crompton'" <wa3dsp at gmail.com>
Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
	Refused (29))
Message-ID: <000c01d41c5a$d19abb40$74d031c0$@cox.net>
Content-Type: text/plain;	charset="us-ascii"

No joy, Doug.  I've wasted most of a week on this and it's obviously not
going to work.  The directions are clear enough (although there are some
conflicting versions posted on the net), but no-go.  

I'm not a moron, but this entire ASL/HamVoIP experience has sure made me
feel that way.  I'm not sure how the average ham finds the time to work his
way through this.  I've done Motorola repeater conversions in less time than
I've invested here.

Time to walk away for a while before I use the Pi for target practice.

Mike
WM4B

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via arm-allstar"
Sent: Sunday, July 15, 2018 12:50 AM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration Refused
(29))

Mike,

 All examples I have seen have the iax.conf context name and the username
in that context set to the same value. Try doing that. I believe the
application might use the context name. This is not to be confused with the
context= parameter which defines the extensions context.

So the example could be in iax.conf

[iax-zoiper]
user=iax-zoiper
....
...

Also see -

https://hamvoip.org/ConnectZoipertoAllstarNode.pdf

*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Jul 14, 2018 at 10:50 AM, "Mike Besemer via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> That's the frustrating part, Doug... it really looks like it should be
> working. I'm setting it up for a friend who is an iphone user; wish there
> was an iaxrpt app for iphone.
>
> Here's my stanzas from iax.conf and extensions.conf.  I checked for, and
> eliminated, trailing spaces as suggested by Steve - WB4BXO, with no luck.
>
> [myphone]
> username=zoiper
> type=friend
> context=myphone
> host=dynamic
> auth=md5
> secret=48166
> disallow=all
> allow=ulaw
> allow=g726aal2
> allow=gsm
> codecpriority=host
> transfer=no
> callerid=WM4B
>
>
> [myphone]
> exten => 48166,1,answer()
> exten => 48166,n,Playback(rpt/node)
> exten => 48166,n,Playback(digits/4)
> exten => 48166,n,Playback(digits/1)
> exten => 48166,n,Playback(digits/7)
> exten => 48166,n,Playback(digits/6)
> exten => 48166,n,Playback(digits/4)
> exten => 48166,n,Playback(rpt/connected)
> exten => 48166,n,rpt(48166|Pv)
>
> Mike
> WM4B
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Friday, July 13, 2018 3:24 PM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused
> (29))
>
> Mike,
>
>  There would be absolutely nothing different in hamvoip as long as you are
> using the same iax and extensions stanzas. That would indicate that either
> the username or password are not correct. If you are using an Android
> device then you should checkout iaxrpt for that. Howto's for that and
> zopier at the hamvoip.org site.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Fri, Jul 13, 2018 at 1:58 PM, "Mike Besemer - WM4B via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hi all,
> >
> > I'm having an issue getting Zoiper to work with HamVoIP.
> >
> > Been through the setup on the website a half-dozen times with no luck.
> >
> > IAXRPT works fine, so it isn't a port issue.
> >
> > Zioper also works fine on my ASL build.
> >
> > Zioper reports: Registration Failed (Registration Refused (29))
> >
> > Mike
> > WM4B
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

------------------------------

Message: 3
Date: Sun, 15 Jul 2018 13:40:31 -0400
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Connect Permanent disconnects
Message-ID:
	<CAMp6vsuiiiHKBRndEuHZNXBraqL2A9mJ9NYz9dF_rMfo-TBQwQ at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Logan,

This is a real problem that we are working on and will have a solution for
this afternoon. The prior sanity checks for crashes and core dumps which
was proper code has disclosed yet another problem in the original Allstar
code involving memory allocation. Once we get this fixed there will be an
update to correct the problem and more detail on the issue. The end result
will be yet again better Allstar code!

*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sun, Jul 15, 2018 at 8:21 AM, "Logan Crook via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello to the group,
>
> I was curious if anyone has the problem with Permanent Connection when
> connecting to a node and disconnects? I've been noticing that during the
> last 2 updates that I connect to my own system with AllStar Nodes when I
> used *7342121 to connect my hub when I look on Supermon to connect
> permanent it is connected when I do a restart on my hub node or I do a
> reboot on my hub it disconnects the 42121 when it was connected permanent.
>
> 73 Logan
> K8LRC
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>

------------------------------

Message: 4
Date: Sun, 15 Jul 2018 13:17:06 -0500
From: Lloyd Duck <lduck at me.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Cc: Mike Besemer <mwbesemer at cox.net>, Doug Crompton <wa3dsp at gmail.com>
Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
	Refused (29))
Message-ID: <D28D52A8-45EB-424C-BBEE-0082D4FF5D6A at me.com>
Content-Type: text/plain;	charset=us-ascii

Mike, 

Just wondering in the Zoiper under settings and Server. Are you putting
ipaddress:4569? 

I do have mine working and it did take a few days of walking off and
counting to 100,000 not the shot the pi. 

On Jul 15, 2018, at 11:42 AM, Mike Besemer via arm-allstar
<arm-allstar at hamvoip.org> wrote:

No joy, Doug.  I've wasted most of a week on this and it's obviously not
going to work.  The directions are clear enough (although there are some
conflicting versions posted on the net), but no-go.  

I'm not a moron, but this entire ASL/HamVoIP experience has sure made me
feel that way.  I'm not sure how the average ham finds the time to work his
way through this.  I've done Motorola repeater conversions in less time than
I've invested here.

Time to walk away for a while before I use the Pi for target practice.

Mike
WM4B

-----Original Message-----
From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via arm-allstar"
Sent: Sunday, July 15, 2018 12:50 AM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration Refused
(29))

Mike,

All examples I have seen have the iax.conf context name and the username
in that context set to the same value. Try doing that. I believe the
application might use the context name. This is not to be confused with the
context= parameter which defines the extensions context.

So the example could be in iax.conf

[iax-zoiper]
user=iax-zoiper
....
...

Also see -

https://hamvoip.org/ConnectZoipertoAllstarNode.pdf

*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Jul 14, 2018 at 10:50 AM, "Mike Besemer via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> That's the frustrating part, Doug... it really looks like it should be
> working. I'm setting it up for a friend who is an iphone user; wish there
> was an iaxrpt app for iphone.
> 
> Here's my stanzas from iax.conf and extensions.conf.  I checked for, and
> eliminated, trailing spaces as suggested by Steve - WB4BXO, with no luck.
> 
> [myphone]
> username=zoiper
> type=friend
> context=myphone
> host=dynamic
> auth=md5
> secret=48166
> disallow=all
> allow=ulaw
> allow=g726aal2
> allow=gsm
> codecpriority=host
> transfer=no
> callerid=WM4B
> 
> 
> [myphone]
> exten => 48166,1,answer()
> exten => 48166,n,Playback(rpt/node)
> exten => 48166,n,Playback(digits/4)
> exten => 48166,n,Playback(digits/1)
> exten => 48166,n,Playback(digits/7)
> exten => 48166,n,Playback(digits/6)
> exten => 48166,n,Playback(digits/4)
> exten => 48166,n,Playback(rpt/connected)
> exten => 48166,n,rpt(48166|Pv)
> 
> Mike
> WM4B
> 
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Friday, July 13, 2018 3:24 PM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] Zioper: Registration Failed (Registration
> Refused
> (29))
> 
> Mike,
> 
> There would be absolutely nothing different in hamvoip as long as you are
> using the same iax and extensions stanzas. That would indicate that either
> the username or password are not correct. If you are using an Android
> device then you should checkout iaxrpt for that. Howto's for that and
> zopier at the hamvoip.org site.
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> On Fri, Jul 13, 2018 at 1:58 PM, "Mike Besemer - WM4B via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Hi all,
>> 
>> I'm having an issue getting Zoiper to work with HamVoIP.
>> 
>> Been through the setup on the website a half-dozen times with no luck.
>> 
>> IAXRPT works fine, so it isn't a port issue.
>> 
>> Zioper also works fine on my ASL build.
>> 
>> Zioper reports: Registration Failed (Registration Refused (29))
>> 
>> Mike
>> WM4B
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> 
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org

------------------------------

Message: 5
Date: Sun, 15 Jul 2018 14:47:45 -0400
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: [arm-allstar] IMPORTANT update!!
Message-ID:
	<CAMp6vssXDeLkgirPL_2HKrVnw32U5kPBGEYsbjszAp2T7s=Pdg at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

An update to correct crashes and potential core dumps on 7/02 has unearthed
yet another memory allocation problem in the original Allstar code. The
sanity checks we added for memory allocation prevented a potential problem
from happening but as a result also prevented the reconnect mechanism from
working. The problem was the release of memory without setting it to null.
This is bad programming practice and while it might not cause a problem a
large percentage of the time, with the right conditions it will eventually
cause a crash. Undoubtedly we will find more of these problems in Allstar
in the future and correct them making the hamvoip package continually more
stable.

If you are using update V1.5.3-34 or V1.5.3-35 please update ASAP to
correct this problem. The latest version is - V1.5.3-36. Users with
versions earlier then V1.5.3-34 should also update to take advantage of the
more robust code and crash prevention.

Use the ADMIN menu item 1 to update.

Sorry for the inconvenience but you can be assured we are doing our best to
improve the hamvoip Allstar code and we will continue to correct any known
problems. This is why it is important for you to let us know if you are
experiencing any issues.

*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

------------------------------

Message: 6
Date: Sun, 15 Jul 2018 12:56:23 -0700
From: "w7jca" <w7jca at yahoo.com>
To: <arm-allstar at hamvoip.org>
Subject: [arm-allstar] New to allstar
Message-ID: <000501d41c75$e8ddd330$ba997990$@yahoo.com>
Content-Type: text/plain;	charset="us-ascii"

I just setup a allstar node. It connected fine for a while then I keyed *70
and it says my node number and repeat only.

I rebooted a few times then I was able to connect again. Once I shutdown the
system and reboot it happens again and says repeat only.

Am I missing something? Any help would be appreciated.

Thank

John

------------------------------

Subject: Digest Footer

_______________________________________________
arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

------------------------------

End of arm-allstar Digest, Vol 50, Issue 42
*******************************************