[arm-allstar] New to allstar

[Doug Crompton]

hamvoip operates in user root. You should have as part of the stock install
-

crontab -l

# Do not remove the following line
# required for lsnodes and allmon
15 03 * * * cd /usr/local/sbin; ./astdb.php cron
00 0-23 * * * (source /usr/local/etc/allstar.env ; /usr/bin/nice -19
/usr/bin/perl /usr/local/sbin/saytime.pl 18954 $NODE1 > /dev/null)

This is in every installation unless you took it out.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Jul 15, 2018 at 6:10 PM, Mike Besemer <mwbesemer at cox.net> wrote:

> Doug,
>
> How DOES one download the node file?  In my ASL image, I have a cron set up
> to run astdb.php once daily.  I don't see that file anywhere in my HamVoIP
> installation.
>
> Mike
> WM4B
>
> -----Original Message-----
> From: arm-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> "Doug Crompton via arm-allstar"
> Sent: Sunday, July 15, 2018 5:23 PM
> To: ARM Allstar
> Cc: Doug Crompton
> Subject: Re: [arm-allstar] New to allstar
>
> John,
>
>  You might be up against the same problem many other have been having, not
> being able to download the node file. Under our new DNS lookup feature that
> is no longer required and I am sending you the instructions to set it up in
> a separate email. Let me know how you make out. You also need to check that
> you are registered as that could be an issue also.  There is a check_reg.sh
> script you can run at the Linux prompt to check that.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sun, Jul 15, 2018 at 3:56 PM, "w7jca via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I just setup a allstar node. It connected fine for a while then I keyed
> *70
> > and it says my node number and repeat only.
> >
> > I rebooted a few times then I was able to connect again. Once I shutdown
> > the
> > system and reboot it happens again and says repeat only.
> >
> >
> >
> > Am I missing something? Any help would be appreciated.
> >
> >
> >
> > Thank
> >
> >
> >
> > John
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>