[arm-allstar] New to allstar

[Doug Crompton]

John,

 You might be up against the same problem many other have been having, not
being able to download the node file. Under our new DNS lookup feature that
is no longer required and I am sending you the instructions to set it up in
a separate email. Let me know how you make out. You also need to check that
you are registered as that could be an issue also.  There is a check_reg.sh
script you can run at the Linux prompt to check that.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Jul 15, 2018 at 3:56 PM, "w7jca via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I just setup a allstar node. It connected fine for a while then I keyed *70
> and it says my node number and repeat only.
>
> I rebooted a few times then I was able to connect again. Once I shutdown
> the
> system and reboot it happens again and says repeat only.
>
>
>
> Am I missing something? Any help would be appreciated.
>
>
>
> Thank
>
>
>
> John
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>