[arm-allstar] TX lockup

Doug Crompton wa3dsp at gmail.com
Wed Feb 7 22:02:08 EST 2018


Frank,

 I am assuming you are using the hamvoip V1.5 Pi software. In the main menu
go to item 13 run simpleusb-tune-menu,

Select the v option and you will see a display on the screen showing you
the COS status. It will look like this:

REALTIME RX TELEMETRY DISPLAY:
     COS     |     COS   |  COS   |  CTCSS  |   CTCSS    |  PTT
(composite) | (input) |  (test) | (input)   | (override) |
   CLEAR    |  CLEAR   | CLEAR| IGNORE |   CLEAR    | CLEAR

The important thing is the COS COMPOSITE which is shown here as CLEAR. This
is the normal unkey state. When COS is KEYED (the node radio is receiving a
signal) it will say KEYED.

Item j on the menu changes the state of COS. Depending on your radio it
will be set to USB or USBINVERT.  USB means the COS signal from the radio
goes high with signal and USNINVERT means it goes low (0V)

Set this by select from the j items for your radio.

Then when you key into your node looking at the v screen it should change
to PTT.

If you continue to have problems with this please get back to me.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*





On Wed, Feb 7, 2018 at 7:13 PM, "Frank via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> To the group,
>
> I have just put together my first Uri / Pi repeater controller using the
> Ham VoIP program.
>
> The issue I am having is I am getting a constant TX on my Uri no matter
> what settings I change or adjust.
>
> When I transmit on a radio, the system stops transmitting telling me I
> have a reversed COR setting somewhere but I cannot find it in either the
> Uri or Pi setup menus. All setting show lo as they should. I have tried to
> switch setting in both menus to hi but this makes no change.
>
> I have spoken with other users in my area and this issue has them stumped
> also.
>
> Any help will be wonderful. My node number is 47403.
>
> Please feel free to contact me via any of the below listings.
>
> 73
>
> Frank
>
>
>
> Frank Cataldo, N2DKI
>
> 225 W. Basic Road
>
> Henderson, NV 89015
>
> 702-641-6555 <(702)%20641-6555> home
>
> 702-561-8555 <(702)%20561-8555> cell
>
> www.n2dki.com
>
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.hamvoip.org/pipermail/arm-allstar/attachments/20180207/c1e54cc0/attachment.html>


More information about the arm-allstar mailing list