[arm-allstar] Issues with DMK URIx USB

[David McGough]

Kyle,

My suspicion is either an RFI condition that occurs when transmitting, or 
perhaps a ground loop.

Have you tried transmitting into a dummy load and looking for these 
errors?

73, David KB4FXC



On Sat, 22 Dec 2018, "Kyle Krieg via ARM-allstar" wrote:

> All,
> 
> I've recently had issues with my DMK URIx USB with misc errors when
> transmitting.  It has been working fine for months and now these errors
> started happening.  Had to take a screen shot of the errors as I could not
> get them to display when SSH'ed into the Pi.
> 
> https://photos.app.goo.gl/uCU9bTpGTTWPBp92A
> 
> I'm running a Pi with the hamvoip image into the URI with a TYT9000 as the
> radio.
> 
> Things I have tried.
> 
> Swap out Pi
> Change power supply
> Rebuild the Pi node with a fresh image
> Swap out the URI for another URI
> Swap out the USB cable from Pi to the URI
> Check the connections to/from the URI to the radio
> 
> Only thing I have not changed is the radio, which I would not think would
> be bad in this situation.
> 
> Do I have a bad URI?
> 
> Kyle
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>