[arm-allstar] DTMF commands are not executed

[Yoram Rotbach]

Thanks for the detailed explanation 

Yoram 
4Z5YR 

נשלח מה-iPhone שלי

‫ב-8 בדצמ׳ 2018, בשעה 20:57, ‏‏Doug Crompton ‏<wa3dsp at gmail.com> כתב/ה:‬

> Yoram,
> 
>    There are two inputs - COS and CTCSS.  They are labelled that way but both are just inputs. This allows (usually repeater) users to select between squelch derived COS and PL derived CTCSS. In a normal simplex mode or even repeater where you just use PL we generally bring it in on the COS line and set that appropriately in simpleusb-tune-menu. If you notice in the simpleusb-tune-menu there are two selections for COS and CTCSS - this corresponds to pins 8 and 7  on the DMK-URI. 
> 
> If you use the 'v' option in simmpleusb-tune-menu you can see realtime the states of these pins as well as PTT for troubleshooting.
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
>> On Sat, Dec 8, 2018 at 1:06 PM Yoram Rotbach <yoram.rotbach at gmail.com> wrote:
>> Thanks Doug,
>> 
>> I’ve temporarily simulated the COS signal and now the node behaves as expected. 
>> The question now is why have the ‘no’ option at all for COSFROM in simpleusb.conf ?
>> 
>> 73
>> Yoram 4Z5YR 
>> 
>> נשלח מה-iPhone שלי
>> 
>> ‫ב-8 בדצמ׳ 2018, בשעה 19:10, ‏‏Doug Crompton via ARM-allstar ‏<arm-allstar at hamvoip.org> כתב/ה:‬
>> 
>>> Yoram,
>>> 
>>>    COS is required in simpleusb. Without it there is no receive indication
>>> and audio going in from the node radio is ignored. If you are using
>>> simpleusb you must get COS from the radio in some way. This is settable as
>>> a high (usb) or low (usbinvert) signal. There are many radios that provide
>>> the COS signal and others can be modified to get it.
>>> 
>>> 
>>> *73 Doug*
>>> 
>>> *WA3DSP*
>>> 
>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>> 
>>> On Sat, Dec 8, 2018 at 12:05 PM "Yoram Rotbach via ARM-allstar" <
>>> arm-allstar at hamvoip.org> wrote:
>>> 
>>>> Hi,
>>>> I've setup a private node 1999 using latest image from hamvoip site for
>>>> RPI.
>>>> I'm using DMK URIx (latest B model) to interface a Yaesu FT-4V radio.
>>>> Connection is via the speaker/mic connection.
>>>> No COS is utilised and I've configured it as 'no' under COSFROM in
>>>> simpleusb-tune utility.
>>>> While TX works fine (I hear time announcements on the hour), I'm having
>>>> issues with DTMF commands. They are not executing.
>>>> When I enter the the Asterisk CLI, I see the DTMF tones decoded correctly.
>>>> This is why I'm puzzled by the fact that commands like *81 and other do
>>>> nothing!
>>>> The only exception is *82 which is causing the system to run a script.
>>>> I've went over the rpt.conf and all relevant sections like 'functions' look
>>>> OK.
>>>> And duplex=1.
>>>> 
>>>> Any help on sorting this out would be appreciated.
>>>> 
>>>> 73
>>>> Yoram 4Z5YR
>>>> _______________________________________________
>>>> 
>>>> ARM-allstar mailing list
>>>> ARM-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>> 
>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>> 
>>> _______________________________________________
>>> 
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org