[arm-allstar] time announcements

[Doug Crompton]

Alan,

 I checked this again. Setting telemdefault to any value only effects the
connect/disconnect messages. It doe not stop the time or any playback of
audio. I would suspect your time is not working period and has nothing to
do with telemdefault. Are you hearing any messages at all? Remeber if you
have duplex=0 then all telemetry is off.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Fri, Dec 7, 2018 at 11:01 AM "Alan Matthews via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi doug
>
> thanks for your reply to my question, the info you gave to kill node
> connection/disconnection announcements was as below, but this has stopped
> time announcements also...
>
> The command is telemdefault in /etc/asterisk/rpt.conf The default setting
> is 2 which allows you to hear your own connects and disconnects but not
> others after it mutes in 1 minute. Setting it to 1 you hear all and 0 you
> hear none.
>
> telemdefault=2
> ; 0= voice telemetry off, 1= on,
> ; 2= Only your telemetry actions
> ; then mutes in 1 minute
>
>
>
> ---
> This email has been checked for viruses by AVG.
> https://www.avg.com
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>