[arm-allstar] AutoSky 2nd node

[Mark Herrick]

Dave,

Thanks!  I had enabled the tailmessage on both nodes so when that feature
moves from the wish list I'll be ready!

Mark

On Sat, Apr 28, 2018 at 10:55 AM, David McGough <kb4fxc at inttek.net> wrote:

>
> Hi Mark,
>
> The way the AutoSKY scripts are currently written, the actual
> announcements from AutoSKY will only run on a single node.
>
> You can have the tailmessage announcement run on multiple nodes, of
> course, by configuring the tailmessage setting in rpt.conf.
>
> Adding this feature is on the wish list. Also, allowing more than one WX
> reporting area is on the wish list.
>
> 73, David KB4FXC
>
>
>
> On Sat, 28 Apr 2018, "Mark Herrick via arm-allstar" wrote:
>
> > So:
> >
> > NODE=$NODE1
> > NODE="29274"
> >
> > Will run weather alerts on both nodes?  Or can we only run alerts on one
> > node per server?
> >
> > Mark
> >
> > On Sat, Apr 28, 2018 at 10:34 AM, "Doug Crompton via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Mark,
> > >
> > > There is no $NODE2 when you add a second node. You would have to
> explicitly
> > > use the node number. Here is the text from the AutoSky.ini file -
> > >
> > > # Selects hamvoip first node
> > > # To define a different node on the SAME server
> > > # comment the following line and uncomment the
> > > # next line and enter the node number in place
> > > # of x's.
> > >
> > > NODE=$NODE1
> > > # NODE="xxxxxx"
> > >
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > >
> > > On Sat, Apr 28, 2018 at 9:57 AM, "Mark Herrick via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Hello,
> > > >
> > > > Can weather alerts via AutoSky be enabled for both nodes on one
> server?
> > > >
> > > > Seems that when I add a 2nd node variable ($NODE2) to the in
> AutoSky.ini
> > > I
> > > > only get the alerts on one node.
> > > >
> > > > The node that is listed second is the one that the messages are sent
> to,
> > > so
> > > > in AutoSky.ini:
> > > >
> > > > NODE=$NODE1
> > > >
> > > > NODE=$NODE2
> > > >
> > > > Will send the alerts to Node 2
> > > >
> > > > NODE=$NODE2
> > > >
> > > > NODE=$NODE1
> > > >
> > > > Will send the alerts to Node 1
> > > >
> > > > 73 & tks, Mark K8BMC
> > > >
> > > > 29272 - 29274
> > > > _______________________________________________
> > > >
> > > > arm-allstar mailing list
> > > > arm-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
>