[arm-allstar] AutoSky 2nd node

[Mark Herrick]

So:

NODE=$NODE1
NODE="29274"

Will run weather alerts on both nodes?  Or can we only run alerts on one
node per server?

Mark

On Sat, Apr 28, 2018 at 10:34 AM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Mark,
>
> There is no $NODE2 when you add a second node. You would have to explicitly
> use the node number. Here is the text from the AutoSky.ini file -
>
> # Selects hamvoip first node
> # To define a different node on the SAME server
> # comment the following line and uncomment the
> # next line and enter the node number in place
> # of x's.
>
> NODE=$NODE1
> # NODE="xxxxxx"
>
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, Apr 28, 2018 at 9:57 AM, "Mark Herrick via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hello,
> >
> > Can weather alerts via AutoSky be enabled for both nodes on one server?
> >
> > Seems that when I add a 2nd node variable ($NODE2) to the in AutoSky.ini
> I
> > only get the alerts on one node.
> >
> > The node that is listed second is the one that the messages are sent to,
> so
> > in AutoSky.ini:
> >
> > NODE=$NODE1
> >
> > NODE=$NODE2
> >
> > Will send the alerts to Node 2
> >
> > NODE=$NODE2
> >
> > NODE=$NODE1
> >
> > Will send the alerts to Node 1
> >
> > 73 & tks, Mark K8BMC
> >
> > 29272 - 29274
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>