[arm-allstar] AutoSky 2nd node

[Doug Crompton]

Mark,

There is no $NODE2 when you add a second node. You would have to explicitly
use the node number. Here is the text from the AutoSky.ini file -

# Selects hamvoip first node
# To define a different node on the SAME server
# comment the following line and uncomment the
# next line and enter the node number in place
# of x's.

NODE=$NODE1
# NODE="xxxxxx"



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, Apr 28, 2018 at 9:57 AM, "Mark Herrick via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello,
>
> Can weather alerts via AutoSky be enabled for both nodes on one server?
>
> Seems that when I add a 2nd node variable ($NODE2) to the in AutoSky.ini I
> only get the alerts on one node.
>
> The node that is listed second is the one that the messages are sent to, so
> in AutoSky.ini:
>
> NODE=$NODE1
>
> NODE=$NODE2
>
> Will send the alerts to Node 2
>
> NODE=$NODE2
>
> NODE=$NODE1
>
> Will send the alerts to Node 1
>
> 73 & tks, Mark K8BMC
>
> 29272 - 29274
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>