[arm-allstar] GM340 COR

[Justin Grigg]

Rick,
What are you using for an interface to the radio?

Justin
KC2EQU

On Thu, Sep 21, 2017 at 12:19 PM, "Peter via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Rick,
>
> The COR pin is user defined  in the programming software under 'GPIO'
>
> My suggestion would be to use 'PL Detect' on pin 8, you can set it
> active HIGH or LOW.
>
>
> HTH
>
> Peter
> G7RPG
>
>
> On 21/09/17 11:36, "Rick Hankinson via arm-allstar" wrote:
> > Hi All,
> > Can anyone let me know how to program the COR line on the Motorola GM340
> > (UHF). I have scan the net and found lots of conflicting info some say
> > pin 4  some say pin 8 and some say 12. As anyone got a codeplug I could
> > have a look at has this may help point me in the right direction or any
> > help in setting up this radio.
> >
> > 73
> > Rick
> > M6PZT
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>