[arm-allstar] GM340 COR

[Rick Hankinson]

Justin
I'm using Raspberry PI and modified USB sound card. I'm in the early stage of putting it altogether.

Rick
M6PZT

"Justin Grigg via arm-allstar"<mailto:arm-allstar at hamvoip.org>
21 September 2017 17:46
Rick,
What are you using for an interface to the radio?

Justin
KC2EQU

On Thu, Sep 21, 2017 at 12:19 PM, "Peter via arm-allstar" <
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org<mailto:arm-allstar at hamvoip.org>
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org
"Peter via arm-allstar"<mailto:arm-allstar at hamvoip.org>
21 September 2017 17:19
Rick,

The COR pin is user defined  in the programming software under 'GPIO'

My suggestion would be to use 'PL Detect' on pin 8, you can set it
active HIGH or LOW.


HTH

Peter
G7RPG


_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org<mailto:arm-allstar at hamvoip.org>
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org
"Rick Hankinson via arm-allstar"<mailto:arm-allstar at hamvoip.org>
21 September 2017 11:36
Hi All,
Can anyone let me know how to program the COR line on the Motorola GM340
(UHF). I have scan the net and found lots of conflicting info some say
pin 4 some say pin 8 and some say 12. As anyone got a codeplug I could
have a look at has this may help point me in the right direction or any
help in setting up this radio.

73
Rick
M6PZT
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org<mailto:arm-allstar at hamvoip.org>
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org