[arm-allstar] GM340 COR

Peter g7rpg at hotmail.com
Thu Sep 21 11:19:14 EST 2017


The COR pin is user defined  in the programming software under 'GPIO'

My suggestion would be to use 'PL Detect' on pin 8, you can set it 
active HIGH or LOW.



On 21/09/17 11:36, "Rick Hankinson via arm-allstar" wrote:
> Hi All,
> Can anyone let me know how to program the COR line on the Motorola GM340
> (UHF). I have scan the net and found lots of conflicting info some say
> pin 4  some say pin 8 and some say 12. As anyone got a codeplug I could
> have a look at has this may help point me in the right direction or any
> help in setting up this radio.
> 73
> Rick
> _______________________________________________
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

More information about the arm-allstar mailing list