[arm-allstar] Simplex Mode 1 Issues

[Justin Grigg]

 Thanks Justin! I don't really care about the beeps, but I would like the connection announcements. Any thoughts on the strange behavior when set to 1?
 

 
Thanks, Justin
 

 
 

 
 
>  
> On Sep 16, 2017 at 9:22 PM,  <Justin Reed via arm-allstar (mailto:arm-allstar at hamvoip.org)>  wrote:
>  
>  
>  
>  This is exactly how it should work. You want 0 for a repeater remote base. You can use 1 for a simplex base station if you want all the beeps. Regards, Justin  >  On Sep 16, 2017, at 7:25 PM, Justin Grigg via arm-allstar wrote:  >   >  I have a newly imaged Pi3 connected to a Repeater Builder USB-RIM Lite  >  Connected to a Motorola CDM-750. This is a remote link for a local repeater  >  that doesn't have internet access at the site.  >   >  When I had the rpt file configured for duplex=0 the node functions  >  perfectly without any telemetry. When I set the file for 1 as soon as the  >  repeater transmits the node starts a cycle of transmitting a courtsey tone,  >  dropping the carrier, transmitting a courtsey tone, dropping the carrier,  >  and so on. It continues on and on until I change the option back to 0  >   >  I am hoping this is a simple setting I am missing.  >   >  Thank you in advance!  >   >  Justin  >  _______________________________________________  >   >  arm-alls
tar mailing list  >  arm-allstar at hamvoip.org  >  http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar  >   >  Visit the BBB and RPi2/3 web page - http://hamvoip.org _______________________________________________ arm-allstar mailing list arm-allstar at hamvoip.org http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Visit the BBB and RPi2/3 web page - http://hamvoip.org 
>
>