[arm-allstar] Simplex Mode 1 Issues

[Justin Reed]

This is exactly how it should work.

You want 0 for a repeater remote base.

You can use 1 for a simplex base station if you want all the beeps.

Regards,
Justin

> On Sep 16, 2017, at 7:25 PM, Justin Grigg via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> I have a newly imaged Pi3 connected to a Repeater Builder USB-RIM Lite
> Connected to a Motorola CDM-750. This is a remote link for a local repeater
> that doesn't have internet access at the site.
> 
> When I had the rpt file configured for duplex=0 the node functions
> perfectly without any telemetry. When I set the file for 1 as soon as the
> repeater transmits the node starts a cycle of transmitting a courtsey tone,
> dropping the carrier, transmitting a courtsey tone, dropping the carrier,
> and so on. It continues on and on until I change the option back to 0
> 
> I am hoping this is a simple setting I am missing.
> 
> Thank you in advance!
> 
> Justin
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org