[arm-allstar] Audio Level Bug?
w4zzkjosh at gmail.com
Fri Sep 15 21:16:32 EST 2017
I have written it to 3 SD Cards. It's like the issue is replicated when
the system would be Transmitting while in the Audio Tune Menu. That's when
it goes from "working" to "broken". I wish I could describe it better. It
can work and does work, until this circumstance is going on, if that makes
If the system is transmitting while you go into the Audio Tune Menu, it
breaks itself in there.
On Fri, Sep 15, 2017 at 8:59 PM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> This sounds like a bad SD card or bad write. It obviously should not do
> that. I would write the card again or get a new card and write that. All
> the software should just work.
> *73 Doug*
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> On Fri, Sep 15, 2017 at 8:15 PM, "Josh Hatton via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> > Hello
> > Since I updated last with a fresh image to the SD, I've not had any TX
> > Audio of any kind. Long story short, I've had to run "alsamixer" and
> > levels up to get any sound on TX. The tune menu built into the package
> > doesn't make any level changes for me. For what it's worth, I was
> > the COS from usb to usbinvert while the TX was keyed up from the wrong
> > setting. I dont know if that would relate to anyone's possible issues,
> > I have that problem. Every time I reboot the Pi, I have to go into
> > Alsamixer again and turn levels up.
> > Doug, I can answer questions for you if needed.
> > Josh W4ZZK
> > _______________________________________________
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
More information about the arm-allstar