[arm-allstar] Audio Level Bug?

[Doug Crompton]

Josh,

This sounds like a bad SD card or bad write. It obviously should not do
that. I would write the card again or get a new card and write that. All
the software should just work.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, Sep 15, 2017 at 8:15 PM, "Josh Hatton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello
> Since I updated last with a fresh image to the SD, I've not had any TX
> Audio of any kind.  Long story short, I've had to run "alsamixer" and turn
> levels up to get any sound on TX. The tune menu built into the package
> doesn't make any level changes for me.  For what it's worth, I was swapping
> the COS from usb to usbinvert while the TX was keyed up from the wrong
> setting.  I dont know if that would relate to anyone's possible issues, but
> I have that problem.  Every time I reboot the Pi, I have to go into
> Alsamixer again and turn levels up.
>
> Doug, I can answer questions for you if needed.
>
> Josh W4ZZK
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>