[arm-allstar] No test tones from DMK URI

[KD0Q]

I considered that... and thought I'd check the cable first.

A bad 25 pin serial cable.  How embarrassing... :-)

Looks like all works now, just need a critical ear to set levels and
emphasis/de-emphasis settings.

Thanks form your help.

73 de kd0q

On Mon, Sep 4, 2017 at 2:27 PM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Glenn,
>
>  You have discounted that the URI might be bad?
>
> You can set duplex=1 with linktolink=yes
> this will result in telelmetry working and you should hear a courtesy tone
> and connect message. THis would confirm that the audio out pin 22 is
> working.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Mon, Sep 4, 2017 at 1:26 PM, "KD0Q-Glenn via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Hello list,
> >
> > I'm trying to test the URI in my Allstar link setup but not detecting any
> > audio on URI pin 22 when I enable a test tone from the
> simpleusb-tune-menu.
> >
> > The configuration is for Allstar to act as a link to an existing PSE-702
> > controller.  COS and PTT are working correctly.
> >
> > Any ideas?
> >
> > Thanks & 73, Glenn - KD0Q
> >
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>